Well, thanks everyone for my last question, it worked like a charm. Now I have another one as I put everything back together. Now keep in mind that I am new at this and probably did something bass ackwards, but when I took the handle unit off (which is just about the entire cover of the saw as well). I unhooked a hose going from the carbarator to the cynlender bout an inch wide. How the heck do I get that hose back on!? there is no room to work with. I can get it lined up and touching, but i cant put pressure on it to get it around the ring. I cant figure out what else to take off that can help me. I'm stuck!
Another 032 AV (put it back together) question
- Thread starter kmosabi
- Start date
Help Support Arborist Forum:
thompson1600
ArboristSite Guru
I assume you are talking about part #25 in the attachment. That's the manifold.
I've never worked on an 032 so hopefully someone else will chime in with info if I'm wrong. But, on most of the Stihl saws, I put the manifold on the cylinder and clamp it down. Then when I'm sliding that tank/handle assembly onto the cylinder, I use a string (wrapped around the manifold and tucked through the hole in the tank/handle assembly to pull the manifold through), or just my fingers to push the manifold through the opening in the handle assembly where the carb fits on.
Tom
I've never worked on an 032 so hopefully someone else will chime in with info if I'm wrong. But, on most of the Stihl saws, I put the manifold on the cylinder and clamp it down. Then when I'm sliding that tank/handle assembly onto the cylinder, I use a string (wrapped around the manifold and tucked through the hole in the tank/handle assembly to pull the manifold through), or just my fingers to push the manifold through the opening in the handle assembly where the carb fits on.
Tom
