Another Craftsman 3.7 thread...

Rugged made
Wesspur
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
W

wsg

ArboristSite Operative
Joined
Apr 16, 2010
Messages
201
Reaction score
47
Location
Alabama
I was searching earlier and havent been able to find out a replacement bar for this saw. Its a Craftsman 3.7 18" ( from what i have seen I believe its the "Roper" type)

Maybe i havent searched correctly but what I can tell it needs a bar for .325pitch/74drag/.050 gauge.

Any help is appreciated!

Local saw shop actually made a chain for it but I was just looking for a bar, Thanks guys!
 
I have 2 of the 917-353750 (solid state ign.) and one 917-353760 (points ign.) Both saws sharing the same mounts. I couldn't find any off the shelf modern bars but did modify a couple different versions to see what worked and would be the easiest. It's late and I just got home from work so I'm not going out to the garage tonight to get the specifics but will throw a few pics up tomorrow of what I came up with if that is the version you are refering to.
 
If it looks like this one. I ordered a bar for mine several years ago from sears and they sent an oregon bar #180PXBD176. There was another # 37360 on the packaging that I assume is a Sears Number.
Cannon
 
Last edited:
wsg said:
I was searching earlier and havent been able to find out a replacement bar for this saw. Its a Craftsman 3.7 18" ( from what i have seen I believe its the "Roper" type)

Maybe i havent searched correctly but what I can tell it needs a bar for .325pitch/74drag/.050 gauge.

Any help is appreciated!

Local saw shop actually made a chain for it but I was just looking for a bar, Thanks guys!
Click to expand...

Are you sure its a Roper? Most were 3.7 17" the 18" are useally Poulans

If indeed it is the older Roper, you can use a Oregon K041 mount bar on it with no mods.

Just ask for a bar for a Poulan Pro 295.
 
Cannon51 said:
If it looks like this one. I ordered a bar for mine several years ago from sears and they sent an oregon bar #180PXBD176. There was another # 37360 on the packaging that I assume is a Sears Number.
Cannon
Click to expand...

Yep, it looks like that one! I looked on the Baileys site and that particular oregon part number says it might not fit the Craftsman mount though.. I guess I just need to call somebody and get some info.

Ok another silly question... if the chain pitch is correct (.325), and the gauge is right..(.050) what does drive link count matter if the mount works on the saw?? I know the mount needs to fit to oil properly but just trying to find a bar for this great old saw.

Thanks!
 
Last edited:
Thats the bar I have had on mine for several years. I just ordered and installed this chain
WOODLANDPRO 18" CHAIN LOOP (.325 X .050) 20RC 74
so your chain should work.
Cannon
 
Modifiedmark said:
Are you sure its a Roper? Most were 3.7 17" the 18" are useally Poulans

If indeed it is the older Roper, you can use a Oregon K041 mount bar on it with no mods.

Just ask for a bar for a Poulan Pro 295.
Click to expand...

thats how i just handled it,, i got an oregon bar for a p3300, with a ko41 mount,,, mine needed a little file work to line up with adjuster pin, but it was an easy fix, teh oil holes were right on....
 
wsg said:
Yep, it looks like that one! I looked on the Baileys site and that particular oregon part number says it might not fit the Craftsman mount though.. I guess I just need to call somebody and get some info.

Ok another silly question... if the chain pitch is correct (.325), and the gauge is right..(.050) what does drive link count matter if the mount works on the saw?? I know the mount needs to fit to oil properly but just trying to find a bar for this great old saw.

Thanks!
Click to expand...

The drive link count determines the length of the chain.
 
Alright.. got an Oregon bar that fits! I cut a couple passes with it today and it runs good. I worked the oiler a bit too, seems to be working better since everything go a good cleaning. Seems the 74 drive length chain is kind of odd, had a chain made for it. Is there a better pre-made chain you guys know of? If not Ill just hit the saw shop when needed again.

Its nice to see the first chainsaw I remember as a kid still running..

Anybody wanna see pics of just another plain ole Craftsman/Roper? Ill see if i can figure out how tonight.

Thanks again!
 
Here's what I got. This was the first time I got to run her about a month ago. Wish I had better pics but all I had to take them was my phone.

attachment.php


attachment.php
 
Hello
Yes that is it. Model # 917353771
I called Oregon Tech support and unfortunately he stated that Oregon doesn’t make the replacement bar anymore. Unless I change the .325 sprocket to 3/8 (.375).
I see you have one on the saw. Any details that might help me?
Thanks for the reply

Joe
 
Joe, I have that particular saw at an old farm house an hour or so away, I just used a pic I had on my desktop.

So I can't get the model no off that bar right now but I am possibly(weather dependent) going down there this weekend if you can wait I'll try to get a number off that Oregon bar.

I have another saw here just like it and this is what is on this bar.

1ST 3700 ROPER CRAFTSMAN BAR INFO.jpg
 

Similar threads

F
Vintage Craftsman 3.7/18" Chainsaw
Replies
6
Views
3K
Tony Mayhew
Tony Mayhew
Johnny Gilchrist
Manual oiler/pump for old craftsman
Replies
4
Views
1K
Modifiedmark
Modifiedmark
M
Older blue Homelite Super XL AO with bar/chain overheating. Not sure what to do
2
Replies
22
Views
1K
MOhunter
M
3
Stihl MS 250-Z chain selection help
Replies
12
Views
1K
epo
E
S
Proper bar and chain for Still MS 290
Replies
11
Views
934
Steven8439
S

Latest posts

Back
Top