Little battle damage is normal, especially the first time with a new design. We will rebuild, stronger than before !
bucking table ideas
- Thread starter unclemoustache
- Start date
Help Support Arborist Forum:
Sawyer Rob
Addicted to ArboristSite
Anyone who owns a trailer or wagon ALREADY owns a bucking table,
AND if you own a tractor, you are waaaay ahead of the game,
Once cut to length, it's very easy to roll the rounds right off the trailer and onto the splitters beam,
and in my case, the splits go right off the end of the splitters grate, and into drying boxes,
Doing it this way is easier and I've never needed a bucking table...
SR
AND if you own a tractor, you are waaaay ahead of the game,
Once cut to length, it's very easy to roll the rounds right off the trailer and onto the splitters beam,
and in my case, the splits go right off the end of the splitters grate, and into drying boxes,
Doing it this way is easier and I've never needed a bucking table...
SR
Portable
It's not a table but I use a pallet fork grapple on my lawnmower to hold logs so I can cut them right where they're going to be stacked by the stove.
- Joined
- Aug 13, 2014
- Messages
- 426
I've got three of those, I run them on anything from the farmall cub and farmall M to a 6hp 1918 Fairbanks Morse Z Plugoscillator engine. Great fun as long as it isn't the dead of summer.
Sawyer Rob
Addicted to ArboristSite
If I was just cutting logs I wouldn’t bother with a bucking table either, but I have a sawmill and all off the falloff is cut into firewood, so that’s a bit different.
Sawyer Rob
Addicted to ArboristSite
Falloff ? I assume you are talking about slab wood.
All of the slab wood from my BSM gets picked up with the pallet forks on my tractor, and then cut for firewood with a chainsaw. It's the fasted most efficient way I've found, unless you have an automated circle mill.
SR
I store my logs on old RR ties. Keeps them off the ground far enough that its easy to get forks under them, and keeps my chain out of the dirt when I'm bucking them to length. Not as fancy as most, but cheap, quick, and easy enough for me.
Pictures or it didn't happen...
Didn't realize it would be so hard to imagine, but here ya go.
This is how I store my firewood. I can get 2 cords per stack. Where I buck them, I have a couple more RR ties in the middle to provide more support as I cut them.
This is how I store my firewood. I can get 2 cords per stack. Where I buck them, I have a couple more RR ties in the middle to provide more support as I cut them.
So you move them from this location to another that has more railroad ties ? Maybe spaced properly for the size you cut them to ?
