Central Va. GTG 2013

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
no, hes just calling you a clown. clown.

sweet can i ride on the top of the van too.:laugh:

Yes.

I don't recall mentioning your wife? She seemed normal and very nice when I met her, I assume she must have lost some sort of bet prior to the nuptials?

Something like that. :msp_mellow:

Randy, I need to make a visit anyway and I have enough room for how many ever saws you need help haulin, and stuff. :msp_wink:

Maybe we can meet in Knox County and convoy......
 
And another one joins the "land of the living". lol I got the crankcase half, swapped out on the JD60v. She roared to life a few minutes ago, and settled into a nice idle(after adjustments). Just got to fab up a clutch cover, and she is all good
 
This one say's it'll eat anything.... at the gtg:hmm3grin2orange::hmm3grin2orange: harvester bar, .404 square ground... and LARGE displacement. Winning combo!

utf-8BSU1BRzE0ODIuanBn_zps01fae035.jpg


utf-8BSU1BRzE0ODQuanBn_zpse3841182.jpg
 
This one say's it'll eat anything.... at the gtg:hmm3grin2orange::hmm3grin2orange: harvester bar, .404 square ground... and LARGE displacement. Winning combo!

utf-8BSU1BRzE0ODIuanBn_zps01fae035.jpg


utf-8BSU1BRzE0ODQuanBn_zpse3841182.jpg

Randy, use of the word "anything" in the context of outcutting wood could be ill-advised. Every time I say such things I eventually regret it. If you are "taking the gloves off"
somebody will likely respond in kind. I don't know how big the biggest wood will be, but it would matter I assume.
Igpoe:cheers:
 
Randy, use of the word "anything" in the context of outcutting wood could be ill-advised. Every time I say such things I eventually regret it. If you are "taking the gloves off"
somebody will likely respond in kind. I don't know how big the biggest wood will be, but it would matter I assume.
Igpoe:cheers:

He's forgotten that we're bringing Tom's JB-OH84. :cheers:
 
2013 gtg site

:cheers:Hi this is ernie harris ,
I am new to this site and this is my first post , i hope everybody that is interested in coming to our gtg is welcome , we are a little cramped for space but we should be able to accomodate room for everybody , I HOPE .
we should have fun for everybody , wives are welcome , will have clean bathroom (porta s@#$er) is avaliable.
We will put up signs (orange in color with black lettering) , hope the weather holds up , if not will try to have GTG on the 13th of april , i hope this can work .
Sawmandave took pics today (3-10-13) will post soon of show site!!!

regards ,
ernie harris :cheers:
 
Last edited:
Welcome to the site Ernie! Can't say thank you enough times in advance for all the work and opening up for us to come visit. Looking forward to it more and more each day.
 
:cheers:Hi this is ernie harris ,
I am new to this site and this is my first post , i hope everybody that is interested in coming to our gtg is welcome , we are a little cramped for space but we should be able to accomodate room for everybody , I HOPE .
we should have fun for everybody , wives are welcome , will have clean bathroom (porta s@#$er) is avaliable.
We will put up signs (orange in color with black lettering) , hope the weather holds up , if not will try to have GTG on the 13th of april , i hope this can work .
Sawmandave took pics today (3-10-13) will post soon of show site!!!

regards ,
ernie harris :cheers:

I gave Ernie some rep, just for hosting this...lol

On a sadder note, the Mall 11 probably will miss this GTG. I think i found the issue. Amazing this saw tried to run, with a practically non-existant magneto side crank seal.:help:
 
Ernie,

Welcome aboard! I plan to be back on Friday, let me know if you need help on the mill. We can also check to see if I have a pulley that will work on your tractor. Let me know if I need to bring a table or two.

Gary
 
Last edited:
To elaborate on my previuos post, I have been fighting this thing for a couple months now. Igpoe mentioned to me, that these MD carbs are extremely intolerant of dirt, so that has been my main focus. Today, I broke down and vac-tested it, and it would not hold anything. Tore the powerhead down, and lo and behold, the seals are wasted. The clutch side is not real bad, but the mag-side is torn in three places.....both seals are stiff as a board. Thankfully, i have not ran it but a few seconds at a time. But, as i pulled the cylinder off, I also noticed the is a spot, under the exhuast port, where it looks like the plating has peeled away:bang:.
Looks like it happened a long time ago, so i am not sure if it will hurt anything,(saw has great compression)

Anyway, that is the progress report for today...lol

Dean, if you read this, PM me. You mentioned a fix for these Magnetos, one time....but i can't remember exactly what was involved. Mine still has spark, but the coil is cracked up, pretty bad.
 
To elaborate on my previuos post, I have been fighting this thing for a couple months now. Igpoe mentioned to me, that these MD carbs are extremely intolerant of dirt, so that has been my main focus. Today, I broke down and vac-tested it, and it would not hold anything. Tore the powerhead down, and lo and behold, the seals are wasted. The clutch side is not real bad, but the mag-side is torn in three places.....both seals are stiff as a board. Thankfully, i have not ran it but a few seconds at a time. But, as i pulled the cylinder off, I also noticed the is a spot, under the exhuast port, where it looks like the plating has peeled away:bang:.
Looks like it happened a long time ago, so i am not sure if it will hurt anything,(saw has great compression)

Anyway, that is the progress report for today...lol

Dean, if you read this, PM me. You mentioned a fix for these Magnetos, one time....but i can't remember exactly what was involved. Mine still has spark, but the coil is cracked up, pretty bad.

Since it still has spark, try to seal up the cracks with some silicone or similar product.
:cheers:
 

Latest posts

Back
Top