Chainsaws and Lifelong Friends Raffle

[TRoller]

What's the 'p' stand for?

What's the '100' mean?

Thanks.

Philbert

P for Pro and 100 for 100cc

 

[Philbert]

I like it!

(I was hoping for 'Philbert' though!)

Philbert

 

[TRoller]

It's payday for most. Let's get some money raised today!

 

[TRoller]

I like it!

(I was hoping for 'Philbert' though!)

Philbert

It could be yours!

 

[GCJenks204]

New Updated Prize List.

If you haven't won in a raffle now is your chance, some seriously good prizes up for grabs...

1. New 461 group donation ported by @Mastermind

2. Partner P100 SuperDonated by @TRoller

3. Makita EA7900 Donated by @Gentleman

4. Rebuilt MS660 Donated by @Adirondackstihl

5. Shelf Queen Craftsman 2.0 Donated by @Stump Shot

6. Husqvarna 254XP Donated by @Dub11 (with rebuild and 4S port job by @Stump Shot)

7. 044/046 CFB Hybrid donated by @GCJenks204

8. Port Job by Fat Fingered Saws LLC @huskihl

9. Slow Race Saw Build by @redfin ( Owner provides the parts for how they want it done. Just note, slow refers to how long it will take him to get it done, not how fast your saw will be).

10. **Updated**16" 60 DL 3/8 .058 Husqvarna Branded / Windsor built Bar with an EM mount. Similar to D005, can work on D009. Donated by @Big1066ih

11. Custom Built Chainsaw Vice donated by @mycamaro_68

12. Hutztl 660 Clone Saw Kit with Cross MMWS Cylinder (to be asssembled) donated by @morewood

13. Raisman 20" K095 3/8's .050 Bar Donated by @Czed

14. Raisman 20" K095 3/8's .050 Bar Donated by @Czed

15. MMWS288XP from Down Under donated by @treesmith

16. Mint Poulan 3800 Donated by @ncfarmboy

17. Almost mint Solo 603 machine marks still on piston through ex. port. Gone through completely cleaned. Carb. kit fuel lines, filter, muffler cleaned repainted high temp baked, spikes repainted, w/ original Solo .404 x .063 20" bar most of lettering still on it. Also donated by @ncfarmboy

18. A very nice McCulloch Double Eagle 50 in good working order with nice bar and a new chain, user manual. Donated by @ajschainsaws

19. A @rattler ported Husqvarna 550 XP Donated by Chris Jackson at Trees Inc. and @Onan18

20. A M105a1/a2 1.5ton surplus military trailer. It will have side boards and bows, just no head board or top. It has a bed lining sprayed in that the Marines didn't even jack up. Donated by @morewood (pics and details starting at post 137)

21. @TermiteBuffet Labour -
A - A full woods port .

B -A case up rebuild of your saw ,you supply parts I do all labor ... to be clear I'll strip it all the way down to split cases , clean scrub saw ..and reassemble with whatever parts you so desire ...also a muffler mod , and squish setting ...

22. Brand new in the box 2258 Jonsered. Donated by @miller Mod Saws

23. Zama C1QDM14A Carb / Clutch Drum for a Makita / Dolmar 5105 Donated by @Dahmer

24. A brand new in the box Walbro HDA 198, perfect for a Tree Forty Six project. Donated by @Onan18

25. A brand new Stihl ES light 3003 20 inch 3/8 .050 bar I'll donate. Box has been opened but only to look at the bar. Donated by @Harzack223

26. While not 100% finished with this nice 032AV, with help of @glock37 on a couple things. Donated by @Stump Shot

27. think I’m going to add a decent lil husky to the mix...details will follow dot dot dot Donated by @Frank bierce

28. Carhartt Oregon Logo Jacket, black - size XL (includes shipping in the US) Donated by @Philbert

29. Honey Roasted Peanut: formerly known as Peanut - a small case 064 with new MS660 cylinder ported will have new piston of whichever type the builder repairing it selects, includes custom air filter base and v-stack. Donated by @Definitive Dave re-ported by @huskihl

30. Lipstick Betty, formerly known as Ugly Betty - a small case 064 with new MS660 ported cylinder and a meteor 288 piston, includes custom metal top cover badge and v-stack. Donated by @Definitive Dave re-ported by @Mastermind

31. Drill Doctor 750X drill bit sharpener. Folks can zoom in on the pics and see what it’ll do spec-wise. Donated by @USMC615

32. 94 rounds of various reload 450 marlin hollow point and hard nose. Donated by @TRoller (pick up only)

33. 189 rounds of hollow point 44 mag. Donated by @TRoller (pick up only)

34. 47 rounds of hard nose 357. Donated by @TRoller (pick up only)

35. Pro Mac 700 to @Chainsaw Jim to be restored and ported as a donation for the Raffle. I am donating the saw and any money needed for parts, and Jim was kind enough to donate his time and labor. Saw and parts donated by @TreeLife labour donated by @Chainsaw Jim

36. A lightly used Stihl MS211. Donated by @USMC615

37. Vintage John Deere 80EV saw Donated by @Deets066 & @ri chevy

38. A hand made handle with vintage axe. Crafted and Donated by @XP_Slinger

39. 2 x 20" GB Ti Bars A041 mount (one modified to fit K095) and 1 Stihl Picco chain to match.
Donated by @psuiewalsh

40. Now Collector's Item Dolmar hat, donated by @psuiewalsh

41. 20" Oregon .050 Hardnose Bar D009 Mount and box of .404/ .050 Chain. Donated by @psuiewalsh

42. Old skool Poulan branded Windsor 36". Never been on a saw. It has a 3/8 tip on it now, I forgot to check gauge but I'm sure it's .063, I'll measure it tomorrow. Jon can tell you more about this than I can, since I got it from him. It's a D196/UXL mount I believe. I bought it for a 750 homelite. Donated by @DSS

43. A new custom hand made pipe. its made out of Italian Briar. With about 40 hours of love and craftsmanship in to it. Donated by @Quietfly

44. Homelite Super XL-925 donated by @crabby cooter

45. 3 NIB Oregon chains 73LGX084G = .058 3/8 84dl donated by Greg Newman

46. 10 boxes of either Oregon 72jgx072g or 72lgx072g chain. Winner has there choice. Donated by @IcePick69

47. Oregon Powermatch 20" bar. Winners choice of mount. Donated by @IcePick69

48. New in Box Maruyama MCV42 Chainsaw. Donated by @IcePick69

49. Survivor Homelite Super 2, the original owner is an older gentleman who cannot use the saw anymore. Put away running years ago probably just needs cleaning to have a runner here. Includes case and owners manual. Saw has strong compression and should be a fun vintage to add to a collection! Donated by @malk315

50. Three loops of 28" .404 .063 Carlton Chain. Donated by @Deets066

51. I’d like to offer 50 of my exhaust deflectors. Donated by @XP_Slinger (more details post #641)http://************/attachments/b2247b34-fdb1-41fd-a601-7a013d7a363c-jpeg.120588/

52. A personally crafted belt axe/knife combo.....stay tuned. Donated by @Scotty Overkill

53. I have a new Golf Piston for a Husqvarna 41 That I will donate. Donated by @tomdcoker

54. It will be one .5 Gallon (2L) Extra Virgin Olive Oil and Mediterranean and Greek Delicacies (Dry Goods)-- including shipping. Donated by @AlfA01

55. It will be one .5 Gallon (2L) Extra Virgin Olive Oil and Mediterranean and Greek Delicacies (Dry Goods)--including shipping. Donated by @AlfA01

 

[AlfA01]

Just to clarify: 54 will be one packet and 55 will be one packet of .5G (2L) Olive oil, goodies and shipping all inclusive.

Trying to keep each under 4Kg including the box. I get a flat rate shipping fee.

 

[GCJenks204]

Just to clarify: 54 will be one packet and 55 will be one packet of .5G (2L) Olive oil, goodies and shipping all inclusive.

Trying to keep each under 4Kg including the box. I get a flat rate shipping fee.

Fixed. Thanks again for your donation.

 

[AlfA01]

Bump.

 

[GCJenks204]

Less than 4 weeks until the draw date and still not half way there.

Let's give until it hurts, our brother needs help and has always helped when we needed him!!!

 

[AlfA01]

Less than 4 weeks until the draw date and still not half way there.

Let's give until it hurts, our brother needs help and has always helped when we needed him!!!

I rang the bell yesterday. The total was at $4K of the $10K goal.

A ton of great prizes in this raffle too.

 

[ChoppyChoppy]

When does it end? I'm not seeing that info.
How much are the tickets?

Not sure what this "other site" is, its showing up with just ******* on the links. I'm guessing the info is there?

 

[AlfA01]

When does it end? I'm not seeing that info.
How much are the tickets?

Not sure what this "other site" is, its showing up with just ******* on the links. I'm guessing the info is there?

The raffle is scheduled to end 27 May, 2018. I'm guessing the drawing will begin the following day. Outdoor Power Equipment (O P E) is the other forum. For some reason here on AS, it encrypts other forum info when you type it in.

$10 each ticket.

Link to Go Fund Me: https://www.gofundme.com/chainsaws-and-lifelong-friendships

 

[ChoppyChoppy]

I'm honestly surprised many would pool together for Jon1212. He's actually one of the few I have blocked because he was always usually rude and harassing to me with extreme twists of the truth. Several times even with racist comments about native Alaskans and such.


Guess he's just like that to me.

 

[GCJenks204]

I'm honestly surprised many would pool together for Jon1212. He's actually one of the few I have blocked because he was always usually rude and harassing to me with extreme twists of the truth. Several times even with racist comments about native Alaskans and such.


Guess he's just like that to me.

Or more likely you have no sense of humour and can't recognize sarcasm. The mere idea of Jon making racist comments is so astonishing to me that I am almost at a loss for words (and I get paid to talk for a living...). Jon has banned idiots from O P E for racist comments, I can only assume it was your lack of understanding what he was saying that lead you to your belief.

I suggest you might want to just move along to another thread before your true level of utter moronicy comes through.

 

[Dub11]

I'm honestly surprised many would pool together for Jon1212. He's actually one of the few I have blocked because he was always usually rude and harassing to me with extreme twists of the truth. Several times even with racist comments about native Alaskans and such.


Guess he's just like that to me.

Jealous much?

 

[AlfA01]

I'm honestly surprised many would pool together for Jon1212. He's actually one of the few I have blocked because he was always usually rude and harassing to me with extreme twists of the truth. Several times even with racist comments about native Alaskans and such.


Guess he's just like that to me.

It's good karma to help a fellow out, even if you don't see eye-to-eye with him.

 

[cgraham1]

I'm honestly surprised many would pool together for Jon1212. He's actually one of the few I have blocked because he was always usually rude and harassing to me with extreme twists of the truth. Several times even with racist comments about native Alaskans and such.

Guess he's just like that to me.

Always usually? Well, which is it?

Seriously, you are a world class pile of chit. Shouldn’t you be scamming the government for permanent disability while at the same time running a full time firewood business?

I find it ironic that you accuse Jonathan of “extreme twists of the truth”, while just about every word you post is either a twist of the truth, or a flat out lie. It seems like it would get old making up lies and slandering people on various online forums, but I guess it must make you feel better about yourself?

I would suggest that if you dont like Jonathan, and don’t have anything good to say, then get the **** out of this thread. Then again, you are a greedy ******* and probably still want to win a prize in the raffle.

 

[p61 western]

Always usually? Well, which is it?

Seriously, you are a world class pile of chit. Shouldn’t you be scamming the government for permanent disability while at the same time running a full time firewood business?

I find it ironic that you accuse Jonathan of “extreme twists of the truth”, while just about every word you post is either a twist of the truth, or a flat out lie. It seems like it would get old making up lies and slandering people on various online forums, but I guess it must make you feel better about yourself?

I would suggest that if you dont like Jonathan, and don’t have anything good to say, then get the **** out of this thread. Then again, you are a greedy ******* and probably still want to win a prize in the raffle.

Very well said.

 

[cgraham1]

Sorry guys... I get a little carried away with VF.

A few years back, on a different forum, he mentioned having a bunch of used cylinders for sale, but he refused to do any of the work to sell them himself, despite many members expressing interest in them... I offered to help him sell some used cylinders on this (and another) site, and it turned out to be a ton more work than I had anticipated. I told him up front that I would do it in my spare time, as a courtesy to him, and also to the guys interested in buying good used cylinders. I told him that it might take months, because I was very busy. He proceeded to send a box with a few dozen cylinders, poorly packed in newspaper, with very little padding in the box. A couple of the cylinders were broken in shipping, many of the cylinders had transfer that needed to be cleaned up, and many of them were complete junk with scoring. There was four or five Poulan clamshell engines in there, which I didn’t even think were worth shipping. I also had to do some detective work to find out what many of the other ones fit. He left it up to me to price the cylinders, and I think I priced them fairly (at least in my mind).

Despite having told him that it was something I could only do in my limited spare time, he kept calling me asking me when I was going to start selling them. I did sell some of them, and although I sent him every penny of money I made off the cylinders, minus shipping, he started a thread accusing me of stealing from him... eventually, I sent back what I hadn’t sold, and washed my hands of the whole mess.

Needless to say, I don’t think very highly of Nate.

 

[Philbert]

AND . . . back to folks who want to help out our Ron Burgandy imposter . . .

Philbert