Charity Firewood Cutting for Interfaith Caregivers of Burnett County WI

[andydodgegeek]

If we have a bunch of willing helpers to move wood mountain and the other random piles wouldn't it be beneficial to have that large capacity light material bucket on a skidsteer? I can bring my skidsteer but I don't have a big bucket, how bout I use yours Tim?

Sent from my XT1254 using Tapatalk

 

[andydodgegeek]

And I also just remembered that the elevator is in need of repair. Do we know what it needs?

Sent from my XT1254 using Tapatalk

 

[dieselfitter]

I can bring the 1.1 cubic yard bucket. No problem.
Regarding elevator, as I recall the key-ways on the drive sprockets are not clocked properly. It was suggested to tighten the sprocket set screws to hold the sprocket in the proper location. I have concerns that won't hold the sprocket in the proper location long term.
If someone could remove the shaft and sprockets. I can broach the sprocket key-way in the proper location.

 

[andydodgegeek]

I just made a snow man. We ain't got no snow so I had to work with what I got. What do you all think?

Sent from my XT1254 using Tapatalk

 

[Philbert]

Needs a stool - let him sit a little.

Philbert

 

[WetGunPowder]

And I also just remembered that the elevator is in need of repair. Do we know what it needs?

Sent from my XT1254 using Tapatalk

The problem is that the sprocket that is not in time is not the correct one. It is like new and the one that is correctly attached to the shaft is worn out. Adam says he found another Little Giant elevator up north and will cut the driveshaft out of it to install in our elevator. I think if we put the plastic liner in it and set screw the pulley like it was we can use it as is for now. I also think that seeing it sat so long that we were alittle lax on keeping the chain tight as we were using it last time........

 

[WetGunPowder]

I just made a snow man. We ain't got no snow so I had to work with what I got. What do you all think?

Sent from my XT1254 using Tapatalk

Can tell it is a Minnesota snowman-Sconnie snowmen have much bigger STICKS!!!!

 

[andydodgegeek]

I'll cut some plastic. We also needed some 1/4" bolts for attaching those flap dealies to the chain. You know, those flap dealies.

Sent from my XT1254 using Tapatalk

 

[5R-INC]

Those flap dealies are called slats. Just knowing that really shows my age lol

 

[WetGunPowder]

Those flap dealies are called slats. Just knowing that really shows my age lol

Duane you old slat you.....

 

[5R-INC]

I have been called worse lol

 

[WetGunPowder]

I'll cut some plastic. We also needed some 1/4" bolts for attaching those flap dealies to the chain. You know, those flap dealies.

Sent from my XT1254 using Tapatalk

Andy-How thick is that plastic? Was thinking if it is thick enough we can countersink the holes and use 1/4" stove bolts to fasten it down.

 

[WetGunPowder]

Roll Call for this Sunday!

WGP

 

[andydodgegeek]

Andy-How thick is that plastic? Was thinking if it is thick enough we can countersink the holes and use 1/4" stove bolts to fasten it down.

1/4" thick. I'll grab some hardware to mount it.

Sent from my XT1254 using Tapatalk

 

[andydodgegeek]

Roll Call for this Sunday!

WGP
Andydodgegeek


Sent from my XT1254 using Tapatalk

 

[WetGunPowder]

1/4" thick. I'll grab some hardware to mount it.

Sent from my XT1254 using Tapatalk

I'll make sure Dale brings the anvil toolie thing for putting the chain back together

 

[5R-INC]

I will have a few extras with me. Not sure how many yet.

 

[svk]

I may actually be able to make this one.

What time is breakfast and then what time do festivities begin at the site?

 

[dieselfitter]

WGP
Andydodgegeek
Dieselfitter

I may even make it to breakfast.

 

[WetGunPowder]

I may actually be able to make this one.

What time is breakfast and then what time do festivities begin at the site?

Breakfast at 0700 Main Street Café in Siren-Usually hit the woodpile around 8.