chris's (stihlman 36) 3120
- Thread starter kdhotsaw
- Start date
Help Support Arborist Forum:
Husky hot saw
Hello seth(nelsonfry)'
Better dig out that stihl 088 and try chris's 3120 on. it should be an interesting race.
ken
[email protected]
530-589-2744
Hello seth(nelsonfry)'
Better dig out that stihl 088 and try chris's 3120 on. it should be an interesting race.
ken
[email protected]
530-589-2744
ccicora
Addicted to ArboristSite
Ken,
Looks real nice, I can't wait to run it Saturday at Bath, NY. I will let you know how I do against the rest.
Chris
PS. Gretchen was wondering what her saw is looking like also.
Looks real nice, I can't wait to run it Saturday at Bath, NY. I will let you know how I do against the rest.
Chris
PS. Gretchen was wondering what her saw is looking like also.
nice
You've made Stihlman's day. Lets see how it stacks up against the 64.
You've made Stihlman's day. Lets see how it stacks up against the 64.
ccicora
Addicted to ArboristSite
SSSHHHHH can't you keep it quiet...... I need a new coil its reving out in the cut and I don't even have it on nitro yet!:Monkey:
Later,
Chris
Later,
Chris
YUKON 659
ArboristSite Guru
Chris, what's going on in Bath Saturday?
Jeff
Jeff
ccicora
Addicted to ArboristSite
There is a timbersports/ woodsman meet. Starts at 11 am. If you go please look me up .
Later,
chris
Later,
chris
YUKON 659
ArboristSite Guru
Chris, if I can make it I'll be sure to look for you. You should be easy to find.... with that "new" saw of your's I'll just wait to see the winner of the 6 cube or the unlimited class 
Jeff
Jeff
ccicora
Addicted to ArboristSite
Ken,
I ran the saw at Bath and pulled out a 12th. Which sounds bad till you realise that there was just about 10 or 11 motor cycle/ Rotex saws there too. Also I didn't have enough time to fully tune the saw for the stage 3 race mix. Don't worry Ken I finally got the saw all tuned up and now I think I could easily place top 10 at the next meet, maybe top 5 if I get the chain fixed that I aced.
Also, Gretchen ran Stihtech's (064CC) saw and finished 18th. Not bad for her second race with a hotsaw. She could of pushed the saw harder through the wood and she would have been alot faster.
Later,
Chris
I ran the saw at Bath and pulled out a 12th. Which sounds bad till you realise that there was just about 10 or 11 motor cycle/ Rotex saws there too. Also I didn't have enough time to fully tune the saw for the stage 3 race mix. Don't worry Ken I finally got the saw all tuned up and now I think I could easily place top 10 at the next meet, maybe top 5 if I get the chain fixed that I aced.
Also, Gretchen ran Stihtech's (064CC) saw and finished 18th. Not bad for her second race with a hotsaw. She could of pushed the saw harder through the wood and she would have been alot faster.
Later,
Chris
