Crappy Stihl Cylinder - Looks like ChiCom Garbage!!!

[Erick]

Woodie, what is all that barking about quality control??? Would you rather replace a cylinder or a whole freaking case halve???

Brahahahahahahaha

Husky #1 Husky #1

Well well well, my goodness look at that, why that is my 372. Man look at that quality there, nice bevel hole thats suppose to be flat. Oh my Woodie, Brad, their quality is really going down hill, oppps wait, that dayummm thing is almost 3 years old now, hmmmmmmmmmmmmmm, maybe Stihl is just now catching up with Husky , whatcha think Woodie, is that what they are doing, hell if Husky can put out ChiCom garbage we can too, awwwwwwwwwwww.

:hmm3grin2orange::hmm3grin2orange::hmm3grin2orange:

(Man I hate to do this and to a couple fellow Sthilheads too.)


Can any of you guys post another picture of the same defect on another saw????

 

[Woodie]

Well well well, my goodness look at that, why that is my 372. Man look at that quality there, nice bevel hole thats suppose to be flat.

Trying to change the subject again, Tom? Your post is old news. It's already had its day in court.

If you recall, it went something like this:

You: My Husky was poorly machined!
Us: You're right!

To date, you haven't provided any other example of that same mistake, so it's obvious it was a one-off flub in Husky's machining and/or quality control.

But many are now complaining (and providing proof) of stihl's crappy quality on their cylinders, and it's happening on several different models.

I'd say stihl has a problem.

And like I said earlier, if you would just admit that and fall on your stihl sword, this wouldn't be going so badly for you guys.


.

 

[blsnelling]

We're good to go joatmon. The new P&C is bought.

 

[blsnelling]

400 posts in 10 1/2 hours!!!!!!!!!!!!!!!!!!

 

[THALL10326]

(Man I hate to do this and to a couple fellow Sthilheads too.)


Can any of you guys post another picture of the same defect on another saw????

Awww your sneaking, you post a Stihl saw case that looks like that, hmmmm

 

[THALL10326]

Trying to change the subject again, Tom? Your post is old news. It's already had its day in court.

If you recall, it went something like this:

You: My Husky was poorly machined!
Us: You're right!

To date, you haven't provided any other example of that same mistake, so it's obvious it was a one-off flub in Husky's machining and/or quality control.

But many are now complaining (and providing proof) of stihl's crappy quality on their cylinders, and it's happening on several different models.

I'd say stihl has a problem.

And like I said earlier, if you would just admit that and fall on your stihl sword, this wouldn't be going so badly for you guys.


.

Woodie you've already made it known you don't have clue when you said changing the case half would be easier than swapping a cylinder. You may as well sit back and read, your secret is out,LOLOLOL

 

[Woodie]

Awww your sneaking, you post a Stihl saw case that looks like that, hmmmm

Why should he have to?

This is another misdirection on your part.

I've got a stihl blower with one tube that's the wrong diameter for the other. Can you post me a blower from any other company with that problem?

FALL ON YOUR SWORD, TOM HALL!!


.

 

[Erick]

Awww your sneaking, you post a Stihl saw case that looks like that, hmmmm

Not being sneaky at all Tommie, just wondering where is the rest of the proof of an ongoing issue???? :dunno:

Could just be you got a bad ONE, that happens ya know.

 

[xwray]

Just a quick observation

I could have missed it but couldnt this have been simply a case of somebody asleep at the switch? Is the belief that *all* Brazilian parts (or Chinese parts for that matter) are poorly made/executed? Or, might the guy who was supposed to be checking the qualily have screwed up and this, or several, got by?

In my very younger days I used to drink a soda called Pal. It was kind of an orange drink and it was bottled not far from where I lived. They had a big window you could look in that showed the bottling machinery and inspectors at work. Such was facinating to a kid like me and I stopped by there several times. Each filled bottle passed by a bright light and supposedly each bottle was inspected by somebody. One day I opened a bottle and luckily I saw the 2-3 inches of filth in the bottom of the bottle before I took a swig.

Swigs happen!

I stihl drank them.

Just wonderin'

 

[blsnelling]

So now we'll never know if Stihl would have replaced it

Joatman, I need to schedule an appointment. This whole ordeal has really shaken me. I'm just so disappointed. I really don't know if I can let this go. I mean, what's to become of our beloved toys with this kind of stuff getting through?

 

[2000ssm6]

A case half.

It would be easier.



.

You are as stupid as ya look too. You want to swap bearings and reseal the cases?

 

[bookerdog]

(Man I hate to do this and to a couple fellow Sthilheads too.)


Can any of you guys post another picture of the same defect on another saw????

LMAO one stealhead beating down another stealhead. Priceless

 

[THALL10326]

Why should he have to?

This is another misdirection on your part.

I've got a stihl blower with one tube that's the wrong diameter for the other. Can you post me a blower from any other company with that problem?

FALL ON YOUR SWORD, TOM HALL!!


.

Why should I have to post another ChiCom junk Husky, isn't one enuff for you, are you saying your a glutting for your own punishment,LOLOL

Woodie I do have a screwdriver pic here, how bout we post that with the story behind it so the fine folks will know how much you really know about small power equipment, naaaaaaaaaa I can't do that to ya, just don't seem right, once was enuff,hehe

 

[Woodie]

Woodie you've already made it known you don't have clue when you said changing the case half would be easier than swapping a cylinder. You may as well sit back and read, your secret is out,LOLOLOL

Watch me here, Tom...this is what you should do:

I, Woodie, am not a saw mechanic. I do not do my own wrenching. Tom is right: I was clearly wrong in my assessment of saw maintenance.

See? That's how it's done. When you're wrong, you're wrong. I was.

And so are you.

Face it, Tom...stihl quality is proving to be mighty, mighty...

...

...

wait for it...

...


...


average.


.

 

[bookerdog]

Why should he have to?

This is another misdirection on your part.

I've got a stihl blower with one tube that's the wrong diameter for the other. Can you post me a blower from any other company with that problem?

FALL ON YOUR SWORD, TOM HALL!!


.

Did you see ali get punchdrunk in his last fight. Were seeing it again with thall LOLOLOLOOL

 

[2000ssm6]

(Man I hate to do this and to a couple fellow Sthilheads too.)


Can any of you guys post another picture of the same defect on another saw????

I'm sure if that one got out, others did too. Now if the "others" owner is on here, well that is a slim chance and I'll bet if it were any of the husky lovers, it would go unspoken.

 

[THALL10326]

Not being sneaky at all Tommie, just wondering where is the rest of the proof of an ongoing issue???? :dunno:

Could just be you got a bad ONE, that happens ya know.

Yup could be but I can say I've never seen a Stihl case screwed up like that one, have you? It also affects the performance of the saw, it runs out of oil way before it runs out of gas, I should start a thread,hahaha Seems I read in this thread there are some shady 359 cylinders out there too, you hear anything about that,hehe

 

[04ultra]

Watch me here, Tom...this is what you should do:

I, Woodie, am not a saw mechanic. I do not do my own wrenching. Tom is right: I was clearly wrong in my assessment of saw maintenance.

See? That's how it's done. When you're wrong, you're wrong. I was.

And so are you.

Face it, Tom...stihl quality is proving to be mighty, mighty...

...

...

wait for it...

...


...


average.


.

.

 

[2000ssm6]

Face it, Tom...stihl quality is proving to be mighty, mighty...

...

...

wait for it...

...


...


average.


.

How about that case woodie?? Hahahahaha, I'm sending you all my bearing jobs from now on.:hmm3grin2orange:

 

[Erick]

LMAO one stealhead beating down another stealhead. Priceless

You stay out of this or I'll take your bottle of Loctite.