delta 5 hp gas bandsaw mill manual

[Tom60]

delta 5 hp gas bandsaw mill blade source

I am looking for a blade source or a link to one for a Delta 5 hp gas bandsaw mill made about 1986. The blade is 120.5 inches long, .032 inches thick, 3/4 inch pitch and the originals were made in Switzerland with alternating stellite teeth. One would help. Can anyone help? (Thanks for the manual info) Thanks [email protected]

 

[Mac88]

No guarantees, but try searching for "Delta International Machinery". They manufactured sawmill equipment. That's about all I can tell you. Good luck.

 

[Sawyer Rob]

Call any of the band suppliers and have some made. They will weld up what you want...

SR

 

[Tom60]

Call any of the band suppliers and have some made. They will weld up what you want...

SR

I was given the name of Wood Miser. What are the ones that hold up the best? Thanks

 

[Sawyer Rob]

I don't think you will get woodmizer to make those bands, try Lennox...

SR

 

[Tom60]

I don't think you will get woodmizer to make those bands, try Lennox...

SR

Thank you sir.

 

[johncinco]

Cooks. http://www.cookssaw.com/bandsaw-blades.html
They do a great job, are reasonable, and have a resharp service that is fast and does not chew down your blades.

 

[Dremel]

I just ordered blades from Timberwolf for that machine. Tell them what you have and they'll recommend a blade for you.

Am I to understand you found a manual for the Lumber Co machine? I'd be REALLY interested in getting a copy if thats the case.

Thanks and good luck to you on getting blades.

 

[Tom60]

I just ordered blades from Timberwolf for that machine. Tell them what you have and they'll recommend a blade for you.

Am I to understand you found a manual for the Lumber Co machine? I'd be REALLY interested in getting a copy if thats the case.

Thanks and good luck to you on getting blades.

The people at Delta at first couldn't find any info on it.. but then they did. I got it from The GREAT guys at Delta technical service. Thanks Delta. No other parts were available there.

 

[scor440]

Delta Lumber Company

I have a manual and a video.Got it from sawmill exchange many moons ago,though i never owned one i was giong to nbuild one but never did.

 

[Tom60]

video of Delta Bandmill

I would love to see the video.. how can it be arranged?

 

[theKiwi]

The people at Delta at first couldn't find any info on it.. but then they did. I got it from The GREAT guys at Delta technical service. Thanks Delta. No other parts were available there.

I have one of these saws from my deceased father in law, and would love to get a copy of the manual if that can be arranged - eMailing a PDF file to me would be great if that's possible please?

Thanks!!

Roger

 

[Tom60]

to the kiwi

I got mine from Delta. If you send me your email I will see if I can get you a link or a copy. [email protected]

 

[theKiwi]

I got mine from Delta. If you send me your email I will see if I can get you a link or a copy. [email protected]

Thanks so much. I can be reached at [email protected]

Thanks!!

Roger

 

[maibusch]

Delta Portable Sawmill (The Lumber Company)

I got mine from Delta. If you send me your email I will see if I can get you a link or a copy. [email protected]

I am also looking for ANY information on the Delta Portable Sawmill (The Lumber Company). If you have any information you can send to me it would be greatly appreciated. Thanks.

Bob
[email protected]

 

[SDB777]

You can try Kilgore Saw in North Little Rock.

They told me they can make absolutely any band size you would ever want!







Scott (they just sharpen mine) B

 

[Cgun47]

Can someone tell me where to find a manual for the Delta Lumber Company portable sawmill?

Thanks,
Cgun47

 

[Cgun47]

Delta Portable Sawmill (The Lumber Company)



I am also looking for ANY information on the Delta Portable Sawmill (The Lumber Company). If you have any information you can send to me it would be greatly appreciated. Thanks.

Bob
[email protected]

Could you tell me where to get a manual for this saw?

Thanks,
Cgun4
[email protected]

 

[kimosawboy]

Cgun4
Go to here
http://vintagemachinery.org/pubs/detail.aspx?id=6604
On the left hand corner of the manual pic their is a ''view pdf''....click that

 

[ChoppyChoppy]

I Realize I'm commenting to some older posts, but I just wanted to correct some info that someone posted.

Woodmizer will certainly make custom blades.