Dolmar ps 350 18 inch bar

[dandan111]

Saw runs pretty well with the new bar. I went with the LP so I could keep same drive sprocket. For a 35cc saw it seems to pull it
fine on limbs. No big wood yet.

 

[Franny K]

Not sure how the running difference is from my 351 model. Mine starts easy at idle and is useable after started from cold faster than anything else I have that is two stroke gasoline. The four stroke chainsaws are in the pole saw configuration. I am pretty sure the actual clutch is used up to the 61cc model so these can be run at lower rpm than might be expected.

 

[dandan111]

I’m not sure on model either but I believe the
351 is more saw than my 350.

 

[Franny K]

I clicked on your attachment. Same as the 420 vs the 421 just smaller bore. They figured a way to get more hp from the xx0 to the xx1 mine has a catalyst. Pretty much the same parts list.