Echo 2511 rear handle

[RedneckChainsawRepair]

I went extreme for light with 12" 325 043 narrow kerf. 2511PN rear handle with Egan pipe for muffler mod.

Weights. Empty PHO, PHO both tanks full and then filled up both tanks with b+c on as start to use one.

Typical of what I been seeing lately the carb had to have L side stop pulled to get rid of the bog. 2nd in a row way lean L side.

Very impressed with the 325 043 narrow kerf they putting on them as option now. 2511PN

Just put you some hig temp grease at the air filter fitting to carb mount flange. That alone keeps fines from sneaking by for me.

Mufflers on all 2511 are horrible stock. They need opened up or just get a Egan pipe. Dyno run to show gains from stock to little pipe.

325 chain compared to 1/4" 043 mini micro I run on the clone v-modest for smooth pruning cuts.

 

[RedneckChainsawRepair]

Dyno run stock to Egan pipe. https://eganperformancesaws.com/products/echo-2511-pipe

325 12" set up and 1/4 mini micro 12"

 

[RedneckChainsawRepair]

 

[RedneckChainsawRepair]

Love the comparison of the 3/8LP and 325 043 narrow kerf chains.

I have all 3. 1/4" mini micro 043, 325 043 nk, 3/8LP .

3/8LP set just sets as a back up set and wont use for fruit tree pruning. I want smooth clean cuts the other 2 do.

 

[RedneckChainsawRepair]

So impressed with the new member of my tag team. That echo 2511 rear handle with nano 325 043 nk set up throws some dang chips as a limber.
Used for 12" under there was no stopping it on the multiple truck maple 5.

Used the hack ported 490 with front and rear 501 handles. No vibrations felt like the plastic crap did.
Running the stock 18" with 23RS the new stuff.