Echo cs-352

[mountainlake]

Get that muff modded, a lot of gain if opened up good. Steve

 

[Horrigan72]

That's my plan. I will update when I'm done.

Sent from my SM-G970U using Tapatalk

 

[Flint Mitch]

That's my plan. I will update when I'm done.

Sent from my SM-G970U using Tapatalk

Get u a torch, heat up the rolled over crimped edge on the muffler cherry red. That steel is now quite soft. Use a chisel or something similar to open up that rolled edge and your there. You'll have to do a little grinding once inside to remove the cat. Once done you can re assemble and tap the rolled edges back over. Takes 15 minutes. Make sure you reuse the original spacers internally to keep the muffler from crushing when tightening or go to the hardware store and get some steel spacers. I believe 1.5" long. You'll have to measure for sure. That's a good running saw after your done!

Sent from my SM-G981U using Tapatalk