A tree that has had the bark rubbed off and then poorly healed over, usually means some amount of rot is hidding, there are other causes but its usually just the bark gets damaged, be it from poor driving poor logging or just storm damage
Falling pics 11/25/09
- Thread starter Burvol
- Start date
Help Support Arborist Forum:
customcutter
ArboristSite Operative
Thank you sir, much appreciated.
Skeans
Addicted to ArboristSite
The beginning of a cat face
Sent from my Pixel XL using Tapatalk
Sent from my Pixel XL using Tapatalk
customcutter
ArboristSite Operative
Yep, probably seen 1000's of them in the woods. Just didn't know they had a name. LOL
A cat face is a defect. It's a section of the bark and cambium layer missing
Most commonly in the lower trunk
It can be man made purposely or not. Often to gather resin & has and still is being used by North American Natives with the Western Red Cedar for making conoe's. The are referred to in the Canadian west coast as (CMT's)
Cultural Modified tree's . With the help or excavating birbs and animals creating oxygen exchange the heart wood will be affected on many species eventually. The tree will close on the ends if it can and give it that female body part shape or conoe shape. Which makes me think of the Beaver. Animals and disease may be a cause also.
You would see lots in Fl from the resin to make turpentine
hseII
Addicted to ArboristSite
This is the bottom of 1 if the Cat Faces: See the hollow middle?
Cat Faces are a sign of damage, & don’t make good Saw logs.
As far as advice,
1. Price a new LT-40 Hydraulic from WoodMizer to get a feel for what a new one cost.
2. Watch Craigslist starting when it gets cold, for a WoodMizer LT-40 Hydraulic. Buy a nice one as soon as you find it.
3. You’ll need a loader: a mid size Skid Steer is a very handy piece of equipment.
Case 1845C or Bobcat 863 is as good as any.
4. You’ll need Grapple & Pallet forks.
5. Learn to sharpen your own blades.
6. Search Solar Kiln.
http://owic.oregonstate.edu/solarkiln/plans.htm
7. Use your 1st sawn stuff to build a shed to Saw under: you’ll thank me later. Space your Post 25’ apart where you will load your logs.
Info added.
customcutter
ArboristSite Operative
Should have seen the 4-5' diameter oak in my in-laws front yard before they had to take it down. It went up about 8 feet and split. It would make any woman who walked by blush. Including my 84 year on mother in law. LOL!
customcutter
ArboristSite Operative
Laurel Oaks and Red Cedar are famous for that down here
Trx250r180
Saw polisher
customcutter
ArboristSite Operative
I've been checking CL from Miami to Virginia and some other sites for about 6 weeks haven't seen any bargains. Do they get cheaper in the winter. I know that WM and Cooks both have sales going on right now. I think I actually like the Cooks HD 3238 better than a WM but WM has the reputation. I posted a thread in the milling section on an LT50 I went and looked at this morning. Thanks for the great tips. Maybe the slab needs to be 50x50 with the saw under one side??? It was definetly going under a structure but hadn't thought about the 25' opening. (DOH forehead slap) LOL
thanks, Ken
hseII
Addicted to ArboristSite
PM sent.
Here abouts its not a cat face, but a cat butt, or cat ***... which if ya think about it, makes more sense
customcutter
ArboristSite Operative
Glad I wasn't drinking anything when I read about the cat's ***.....Got a laugh out of that!
GilksTreeFelling
ArboristSite Operative
Well spent the morning putting down some pecker poles for a lady who wanted to open up her horse trail to give an area to camp rest picnic etc. Most of it I think was Aspen *see attached pic of me holding a dropped leaf on the trunk*
All between 6-8" dia 35-40ft long. Shame that was the spot she wanted cleared out as they would have been some nice trees in about 15 years.
I'll go in tomorrow and drag the logs out and clean it up some.
I dislike small diameter trees. But I got to practice some dove tails which is something I was never good at.
Been putting the pfanner Protos helmet through it's paces the past week or 2 so far I am definitely liking it over the husqvarna helmet I was using.
All between 6-8" dia 35-40ft long. Shame that was the spot she wanted cleared out as they would have been some nice trees in about 15 years.
I'll go in tomorrow and drag the logs out and clean it up some.
I dislike small diameter trees. But I got to practice some dove tails which is something I was never good at.
Been putting the pfanner Protos helmet through it's paces the past week or 2 so far I am definitely liking it over the husqvarna helmet I was using.
Attachments
GilksTreeFelling
ArboristSite Operative
Well spent the morning putting down some pecker poles for a lady who wanted to open up her horse trail to give an area to camp rest picnic etc. Most of it I think was Aspen *see attached pic of me holding a dropped leaf on the trunk*
All between 6-8" dia 35-40ft long. Shame that was the spot she wanted cleared out as they would have been some nice trees in about 15 years.
I'll go in tomorrow and drag the logs out and clean it up some.
I dislike small diameter trees. But I got to practice some dove tails which is something I was never good at.
Been putting the pfanner Protos helmet through it's paces the past week or 2 so far I am definitely liking it over the husqvarna helmet I was using.
All between 6-8" dia 35-40ft long. Shame that was the spot she wanted cleared out as they would have been some nice trees in about 15 years.
I'll go in tomorrow and drag the logs out and clean it up some.
I dislike small diameter trees. But I got to practice some dove tails which is something I was never good at.
Been putting the pfanner Protos helmet through it's paces the past week or 2 so far I am definitely liking it over the husqvarna helmet I was using.
jomoco
Tree Freak
Nice pics n technique Coyote!
I love hard head plastic wedges mo better in such situations.
Steel capped.
Jomoco
I love hard head plastic wedges mo better in such situations.
Steel capped.
Jomoco
GilksTreeFelling
ArboristSite Operative
Unfortunately the steel headed wedges arnt available locally and to order them online atfter price +shipping for just one I can get 4 of the Oregon plastic ones locally lol
RandyMac
Stiff Member
customcutter
ArboristSite Operative
OK, another learning situation. In the group of photos above felling the small aspen. The last picture shows a cut I've never seen. I'm assuming the notch is made first, then the plunge cut in the middle and the wedge driven in, and then the two side cuts made? Is that correct. Purpose is to fell the tree in a certain direction, but diameter of the tree doesn't allow driving the wedge behind the bar like traditionally done, correct? I guess you are extremely careful sneaking up on the "hinge" when making the side cuts?
