FarmerTec Huztl MS660 Updated Build Kit - Build Thread

[ammoaddict]

Before I wood say go without base gasket I would like to see some pictures of the inside of the cylinder.

Ok, I love try to get that done tomorrow evening. Thanks

 

[CsClimbr]

I think some look at it like it's a race to the bottom. Less = more compression on a aftermarket crank makes no sense to me. I have deleted the gasket before on 660 kits and on yours that would make sense. Use some goo on it.

It's no trouble to ask questions. You may get different answers and that's ok. You can also reask the question. Say I am getting opposing answers. It's ok

kit info & packing lists @ http://thechainsawkitguy.com

Did your kit come with the metal base gasket also? Which way should it be installed as it’s not flat..

 

[MG porting]

Did your kit come with the metal base gasket also? Which way should it be installed as it’s not flat..

Dish side down.

 

[MG porting]

Dish side down.

Sorry the center of the gasket should look like a dish when you install it.

 

[Bedford T]

My vote is "bowl" shaped. Rim up

kit info & packing lists @ http://thechainsawkitguy.com

 

[MG porting]

My vote is "bowl" shaped. Rim up

kit info & packing lists @ http://thechainsawkitguy.com

I'm known to eat my soup in a dish.

 

[Bedford T]

I laughed when I wrote that. Because, I remember asking the excat question and used that example to wrap my head around it.

kit info & packing lists @ http://thechainsawkitguy.com

 

[MG porting]

I laughed when I wrote that. Because, I remember asking the excat question and used that example to wrap my head around it.

kit info & packing lists @ http://thechainsawkitguy.com

Lol. That's funny.

 

[CsClimbr]

Sorry the center of the gasket should look like a dish when you install it.

My vote is "bowl" shaped. Rim up

kit info & packing lists @ http://thechainsawkitguy.com

Phew.. I guessed correctly

Thank you sirs!

 

[Bedford T]

Phew.. I guessed correctly [emoji23]

Thank you sirs!

The Gambler.

kit info & packing lists @ http://thechainsawkitguy.com

 

[MG porting]

Phew.. I guessed correctly

Thank you sirs!

That's good.

 

[ammoaddict]

I will try to get a picture after work today. Do you want to see mainly the squish area or port areas?
Thanks for your help.

 

[ammoaddict]

I will try to get a picture after work today. Do you want to see mainly the squish area or port areas?
Thanks for your help.

 

[MG porting]

I will try to get a picture after work today. Do you want to see mainly the squish area or port areas?
Thanks for your help.

Squish area and top of cylinder bore and outer view of the exhaust port.

 

[ammoaddict]

Squish area and top of cylinder bore and outer view of the exhaust port.

Inside of cylinder

 

[ammoaddict]

Squish area and top of cylinder bore and outer view of the exhaust port.

Exhaust port

 

[MG porting]

View attachment 652551
Inside of cylinder

Your good on for a no base gasket looks like they did a better job on your cylinder.

View attachment 652552 Exhaust port

Now on the exhaust if you would like to get rid of some heat and pick up a little power open up the flout of the port but you need to stay away from the inside of the port but it's all up to you but for now try without base gasket and go from there.

 

[Bedford T]

Your good on for a no base gasket looks like they did a better job on your cylinder.

Now on the exhaust if you would like to get rid of some heat and pick up a little power open up the flout of the port but you need to stay away from the inside of the port but it's all up to you but for now try without base gasket and go from there.

Hey man, show me the flout. I never knew what that was. I looked it up and it don't show up

kit info & packing lists @ http://thechainsawkitguy.com

 

[MG porting]

Hey man, show me the flout. I never knew what that was. I looked it up and it don't show up

kit info & packing lists @ http://thechainsawkitguy.com

Lol. Spelling problems yes sir. But I'm trying to say is the outer porshen of the port and Yea I know I spelt porshen wrong to.

 

[Bedford T]

Lol. Spelling problems yes sir. But I'm trying to say is the outer porshen of the port and Yea I know I spelt porshen wrong to.

Do you use a smart phone? Today you really don't need to spell just watch for the little redline to show under a word and the right click and pick a pretty one

kit info & packing lists @ http://thechainsawkitguy.com