FarmerTec MS200t What's in the Box

[Bedford T]

There are simple pressure points that line it up.

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[67L36Driver]

My favorite Stihl dealer wants $54 for the handle. [emoji2960]

We may try the kitchen oven at 300 and reshape to fit. [emoji848]

 

[Bedford T]

The oven, a useful tool. I had no issues getting mine on once I discovered the points.

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[grizz55chev]

My favorite Stihl dealer wants $54 for the handle. [emoji2960]

We may try the kitchen oven at 300 and reshape to fit. [emoji848]

If you have to force it, it ain’t right, and likely never will be. You get what you pay for. The kit is crap.

 

[LetsDig16]

Mines still in pieces needing the boot installed. And it had a hand numbing vibration.
After crunching the numbers on what it needed to make it reliable saw I stopped and cut my loses.
With what it needs to make it a grab and go saw takes all the hype out of a having a 200t to start with.
A real 200t is a saw that has a lot of power and low problems.

 

[Bedford T]

This never was a grab and go saw. Lol. This is not a real Stihl. How you thought it was or should be, not sure how you came around to that. It needs the boot, screws, carb, carb stubs. That's not a long list.

You can buy you a stihl saw that has had a lot of use for maybe 600$. You will have less in this kit.

The more I think about your post I would bet it whipped you and your feelings are hurt. You can whip it if you try. You are responsible for building kit saws and over coming road blocks. I make videos that give you a clear road.



chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[grizz55chev]

Mines still in pieces needing the boot installed. And it had a hand numbing vibration.
After crunching the numbers on what it needed to make it reliable saw I stopped and cut my loses.
With what it needs to make it a grab and go saw takes all the hype out of a having a 200t to start with.
A real 200t is a saw that has a lot of power and low problems.

You are wiser than most, you can’t buy a fake Rolex for a fraction of the cost and expect anything but a souvenir. Bedford t sells these things so he’ll say anything to make you feel like it’s a good deal, it ain’t! It’s not your fault that you couldn’t polish that turd.

 

[Bedford T]

I got some screws in. I had assumed that two of the recoil screws were P's. Turns out I should never assume. 3 are machine screws and just one is a P. To me that seems odd, guess I was over thinking it.

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[lone wolf]

Find a machine shop, or a friend with a manual lathe. Put the lathe in neutral, or the highest speed gear (you won't turn on the lathe). Chuck the PTO side of the crank in the headstock, put a dial indicator capable of measuring 0.001" +/- 0.0005" on the flywheel side of the shaft and slowly rotate the headstock/chuck while you measure runout on the dial indicator. For extra measure, put the flywheel side in the chuck and measure on the PTO side of the crank if you saw any movement of the needle. You should be less than 0.001" for a straight and true crank. Anything over 0.005" and you should replace.

You can do it on vee blocks too.

 

[lone wolf]

Handle don’t fit worth squat.

That's because it is out of whack compare it to an OEM one on a flat surface and see how much.

 

[lone wolf]

I got some screws in. I had assumed that two of the recoil screws were P's. Turns out I should never assume. 3 are machine screws and just one is a P. To me that seems odd, guess I was over thinking it.

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

OEM has 2 machine screws and two ST screws, the machine go in the metal and the ST in the tank plastic.

 

[LetsDig16]

This never was a grab and go saw. Lol. This is not a real Stihl. How you thought it was or should be, not sure how you came around to that. It needs the boot, screws, carb, carb stubs. That's not a long list.

You can buy you a stihl saw that has had a lot of use for maybe 600$. You will have less in this kit.

The more I think about your post I would bet it whipped you and your feelings are hurt. You can whip it if you try. You are responsible for building kit saws and over coming road blocks. I make videos that give you a clear road.



chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

Your bat **** crazy! Your own words you call it a clone/copy. When is yours going to run? Or has it whipped your ass? There is a couple more problems that I ran across that you haven’t listed or mentioned. Mine was running but I seen the boot after looking for the vibration. It feels like a Orange poulan wild thing. Where’s a running vid?

 

[lone wolf]

My favorite Stihl dealer wants $54 for the handle. [emoji2960]

We may try the kitchen oven at 300 and reshape to fit. [emoji848]

Its the lower side handle that is out of whack not the whole top piece buy a used OEM side handle and good to go!

 

[LetsDig16]

The echo is the around the same price as the huztl without the crap.

 

[67L36Driver]

Runs and cuts great!

The echo is the around the same price as the huztl without the crap.

And, you are a jackoff and a troll so go get ****ed.

 

[Bedford T]

That makes sense

OEM has 2 machine screws and two ST screws, the machine go in the metal and the ST in the tank plastic.

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[LetsDig16]

Runs and cuts great!



And, you are a jackoff and a troll so go get ****ed.

Lol you must be bedford T justice’s go to guy or consultant. Yours looks good but doesn’t look like it’s cut much wood yet.

 

[Bedford T]

I doubt he owns one. This happens often. Whiners. Look at his complaint. It was not grab and go. Lol

Runs and cuts great!



And, you are a jackoff and a troll so go get ****ed.

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[Bedford T]

I know who your are. Besides a dumbass. You sign up to make stupid posts, what's this your 5th name. I am going to teach you a lesson. I hate to do it, but stupid is as stupid does. I hope it does not effect your family.

Lol you must be bedford T justice’s go to guy or consultant. Yours looks good but doesn’t look like it’s cut much wood yet.

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[LetsDig16]

This never was a grab and go saw. Lol. This is not a real Stihl. How you thought it was or should be, not sure how you came around to that. It needs the boot, screws, carb, carb stubs. That's not a long list.

You can buy you a stihl saw that has had a lot of use for maybe 600$. You will have less in this kit.

The more I think about your post I would bet it whipped you and your feelings are hurt. You can whip it if you try. You are responsible for building kit saws and over coming road blocks. I make videos that give you a clear road.



chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

Your missing what I wanted in the kit. I want to put it together and have a saw that fits and runs good. Is that to hard to ask? Huztl had to know these parts need refining. Why put it out if it’s doent work with the parts supplied?
I think they want their customers to be a test mule and spend their own hard earned $ to work the bugs out for them. Who’s at fault? I guess me for buying one. That’s all I wanted and I didn’t find it here. So I’m done with mine. You all can carry on. [emoji1422]