FREE Husqvarna 346XP - Can't identify it's age

[huskydave]

Did a 12" 3/8LP on a 026 pro ported by Dan Henry years back.

Put a 12" 3/8LP on the echo once too.

I ran 9 tooth rims on ported 026's/260 pro's with .325 chain and 16 inch bar. Saws would cut like a laser in smaller wood.

 

[RedneckChainsawRepair]

I ran 9 tooth rims on ported 026's/260 pro's with .325 chain and 16 inch bar. Saws would cut like a laser in smaller wood.

325 you say. 9 you say.

 

[huskydave]

Nice. I never got into the full race porting just did work saws.

 

[RedneckChainsawRepair]

Nice. I never got into the full race porting just did work saws.

That was for work saws.

Not race saws. They just got 3/8 7T, Partner 5000 49cc.

 

[huskydave]

That is cool. Saw runs great. I spent 18 hours filing a chain once using Art Martins method.

 

[diver64]

20'' bar is a lot for a 45cc saw, it will be much happyer with 16'' or 18''.
I have 2 of those pluse many 50cc, I do not use 20'' on any of them, just grab a bigger saw.

I'd run a 16in as suggested. 18in in softwood but better would be 18in narrow bar. My 41 Husky ran with both