NYH1
Tacticle Chainsaw Operator.
I'm getting my '86 Ramcharger back from my uncle. He wrecked the passenger side. I don't know if it can repaired or just used for parts. Either way I'm getting it. The drive train is in very good working order and should make really good cores for rebuilding.
It has a 360 4 bbl, NP435 4 speed manual tranny, 208 t-case, Dana 44 front diff and 9 1/4 read diff w/ 3:21 gears.
Future plans include either repairing the body on this one or find another Ramcharger or Trailduster (worst case, a short box 1/2 4x4) that needs engine, tranny ect. work.
I want to build a 408 stroker out of the 360 with 9.0 to 9.5:1 compression, a small hydraulic cam that makes a ton of low end torque, Performer intake with a 600 to 650 CFM carb, full length headers, 2 1/4 full length dual exhaust. Use the NP435 with a good clutch and pressure plate set up. Use the 208 t-case. Run Detroit Lockers (or another good LSD type) in both the front (w/ lock out hubs) and rear diffs. I want to run 4:10 gears.
I'd like to go with 33x10.5-15 tires and the minimum suspension lift required for this size tire. We'll drive this on the road mostly with some off roading, nothing to serious. Will the Dana 44 and 9 1/4 diffs work with a set up like this?
It has a 360 4 bbl, NP435 4 speed manual tranny, 208 t-case, Dana 44 front diff and 9 1/4 read diff w/ 3:21 gears.
Future plans include either repairing the body on this one or find another Ramcharger or Trailduster (worst case, a short box 1/2 4x4) that needs engine, tranny ect. work.
I want to build a 408 stroker out of the 360 with 9.0 to 9.5:1 compression, a small hydraulic cam that makes a ton of low end torque, Performer intake with a 600 to 650 CFM carb, full length headers, 2 1/4 full length dual exhaust. Use the NP435 with a good clutch and pressure plate set up. Use the 208 t-case. Run Detroit Lockers (or another good LSD type) in both the front (w/ lock out hubs) and rear diffs. I want to run 4:10 gears.
I'd like to go with 33x10.5-15 tires and the minimum suspension lift required for this size tire. We'll drive this on the road mostly with some off roading, nothing to serious. Will the Dana 44 and 9 1/4 diffs work with a set up like this?
Last edited: