- Joined
- Jul 19, 2019
- Messages
- 4,751
- Reaction score
- 9,662
Picked up a bar on the cheap last week- old school Granberg double ender, guessing it is what they class as a 56 inch?
Not sure how they are sold or measured- but it is 1425mm overall- so my maths makes it 56 inches overall, actual cut length with the helper handle on would be around 48 inches.
IF it has ever been used (looks to not have been by lack of wear) it has been very low hours usage.
Price was right at $40 of our dollars, which works out to USD $22:38 or CAD $32:39.
Guessing it might mount up to the 125SP or 075.
12mm bar slot and a multitude of oil and adjuster holes, 0.063 gauge.
Guessing by the mounting holes it was meant for the old steel Granberg mill frame?
Not sure how they are sold or measured- but it is 1425mm overall- so my maths makes it 56 inches overall, actual cut length with the helper handle on would be around 48 inches.
IF it has ever been used (looks to not have been by lack of wear) it has been very low hours usage.
Price was right at $40 of our dollars, which works out to USD $22:38 or CAD $32:39.
Guessing it might mount up to the 125SP or 075.
12mm bar slot and a multitude of oil and adjuster holes, 0.063 gauge.
Guessing by the mounting holes it was meant for the old steel Granberg mill frame?
