Hand Saws,,
- Thread starter TreeJunkie
- Start date
Help Support Arborist Forum:
- Joined
- Apr 3, 2002
- Messages
- 6,084
- Reaction score
- 634
I will say that since I got the Zubat, the climbing saw stays hung in the tree a lot more!!!
Last edited:
wiley_p
ArboristSite Guru
FYI the Corona blades were manufactured in Japan until lastyear, now they are made in Korea, Japan has produced superior cutting instruments for a long, long time. To state that they produce poor products is quite ignorant of the facts.
I use the pocketboy 130mm large teeth and gomboy 240mm large teeth, they are both foldering saws and make real short work of anything under about 2 1/2 inch diameter. for the bigger branches than 2 1/2 inches I use my gomtaro 270mm large teeth, I also have a gomtaro 270mm large teeth on the nobita 6 foot pole, works like a charm I can get branches about 18-20 feet up with my 8 foot orchard/pruning ladder.
new treeman
ArboristSite Lurker
hand saws
what is zubat ? I need a new climbing saw
what is zubat ? I need a new climbing saw
jkrueger
ArboristSite Guru
Gee, I'm talking about tool stell not international challenges. If that is what it sounded like I appologize. I some time type out bits of what I'm thinking.
Later,
Jack
Later,
Jack
Koa Man
Kahuna giganticus
Japan sword makers have produced quality blade steel for hundreds of years. Have you ever seen a genuine Samurai sword? The blades are laminated and extremely sharp.
I don't know where Felco or Bahco (previously Sandvik) are made, but my Japanese Okatsune hand pruners have a Rockwell hardness of 70, noticably superior to all others I've used.
With Japanese handsaw blades, the Silky tool steel is certainly better than Corona, as well, the machining process is likely better. Corona blades often seem a bit rough. But then there is the impusle hardening procedure to consider.
With Japanese handsaw blades, the Silky tool steel is certainly better than Corona, as well, the machining process is likely better. Corona blades often seem a bit rough. But then there is the impusle hardening procedure to consider.
NickfromWI
Addicted to ArboristSite
I just got the Ibuki and I LOVE IT!
love
nick
love
nick
MasterBlaster
TreeHouse Elder
It makes clean cuts?
THOR
ArboristSite Lurker
Ok i've read a whole lot about the handsaws and which is better so I'll take ya word for it and i'll buy a Zubat But please tell me why you all use the curved blade in preferance to straight as im a trainee climber and all the climbers over here i've seen use the Gomtaro? I'm no pro so i hope i don't offend anyone posting in here
Koa Man
Kahuna giganticus
The curved blades have more cutting "power", but there are times when it will cut something you don't want to cut in a tight situation. The straight blade is better in tight spots, but overall, I feel the curved blade is slightly better. I have had extensive experience in the use of both.
Acer
ArboristSite Operative
Just to add my 2p..
My first Silky was a Nakanoto, with a straight blade, but I bought a Zubat after reading about it on this site. It's personal preference, but I prefer the straight blade. I sometimes would need to cut a sink, and you can't really do that properly with a curved blade. Also, I think a curved blade would probably give you the edge when the blade is less sharp than a silky. These saws seem to feed themselves into the cut providing you simply pull and don't force it. What I also like about the nakanoto was the rubber bit that held it into the scabbard. It never ever fell out when i was moving around, yet I never had any trouble pulling it out one handed (I'm talking about the saw here btw! )
Have you seen their range? It's quite extensive, although I wonder about their choice of names sometimes..(Bigboy? Skattboy?) Perhaps we ought to have an AS competition to name their next new saw..
My first Silky was a Nakanoto, with a straight blade, but I bought a Zubat after reading about it on this site. It's personal preference, but I prefer the straight blade. I sometimes would need to cut a sink, and you can't really do that properly with a curved blade. Also, I think a curved blade would probably give you the edge when the blade is less sharp than a silky. These saws seem to feed themselves into the cut providing you simply pull and don't force it. What I also like about the nakanoto was the rubber bit that held it into the scabbard. It never ever fell out when i was moving around, yet I never had any trouble pulling it out one handed (I'm talking about the saw here btw!
)Have you seen their range? It's quite extensive, although I wonder about their choice of names sometimes..(Bigboy? Skattboy?) Perhaps we ought to have an AS competition to name their next new saw..
