hey all. got a hq 257 with walbro hda carb that "Bubba" before me tightened high speed carb screw in so tight that it broke tip and it lodged inside carb.
i removed main nozzle and tried pushing tip back out via fuel hole. but its really in there as its like a taper fit. i need something with a almost 180*angle thats very small diameter to get in hole, but also pretty strong as small wire bends when i force it. tried sonic cleaner to see if that help to remove
anyone found anything that one might use?
will post pics tonight
btw new carb is $300.+ walbro has seemed to jack the prices of all their parts lately
thanks in advance
i removed main nozzle and tried pushing tip back out via fuel hole. but its really in there as its like a taper fit. i need something with a almost 180*angle thats very small diameter to get in hole, but also pretty strong as small wire bends when i force it. tried sonic cleaner to see if that help to remove
anyone found anything that one might use?
will post pics tonight
btw new carb is $300.+ walbro has seemed to jack the prices of all their parts lately
thanks in advance
