Homelite clutch help

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mike mandry

ArboristSite Guru
Joined
Aug 27, 2002
Messages
767
Reaction score
48
Location
Old Monroe, MO
I have a NOS Homelite clutch, part # A-94744

I "Thought" it fit my SXL 925, however, I was wrong.

Close, but no cigar.

The OD is the same. Only difference is it is a little thicker & the crank threads are slightly larger than on the 925. Otherwise, they are the same.

If anyone can ID this, I would greatly appreciate it.

mystery clutch is on the left, 925 clutch on the right.
 
Since it is a Homelite clutch I bet it fits a Homelite-Sure looks a lot lik ethe Clutch on my Alpina SP120 though.
 
The shoes on the bigger clutch,look like about the same as a 2100 homey,but the spinder is different.
 
ray benson said:
Hi Mike,
The clutch is listed for Super 1050.Homelite used 5/8" thick shoes on early saws and the 3/4" thick on newer saws.It is not listed in my old parts list for the saw,but it was listed on www.ordertree.com as clutch kit.
Ray


Is this clutch The same as XP1000?
 

Latest posts

Back
Top