Husky 346 NE Echo 501

[RedneckChainsawRepair]

Guy said he wants to trade a new echo 2511PN. So when new 4910 gets here. I am to get it out. Check over.
Test it stock and check tune where at stock.

Then muffler mod and retune and test. Then ship it off.

Amazing stuff.

 

[RedneckChainsawRepair]

4910 I took on trade to go with the 2 501’s and hack ported 490.

Swear never even made a cut before.

 

[RedneckChainsawRepair]

All they need to keep fines out is this nickle o-ring. You can add grease to base of af mount too but didnt see a reason to to date. Been doing this on these since 2022.
So one going in right away too.

 

[RedneckChainsawRepair]

Echo 4910 PHO weight dry and like new clean.

The both tanks filled up PHO

Then both tanks filled up and 16" oregon versacut 325 050 C33 chain.

 

[RedneckChainsawRepair]

4910

Tune was so off from factory again. Idle 4400, lazy bogging L Side to lean. H to fat in Mid 11’s again.
So a real Turd if someone bought it to use. As is. Smh.

I’ve had 2 now I would throw if tried to use the way they came. Horrible not usable at all.

 

[RedneckChainsawRepair]

Another load of parts came in. Only 1 more part in route, if I guessed right in my mind parts needed.

 

[RedneckChainsawRepair]

I traded that 4910 I just got in for a 2511PN with Egan pipe myself.

https://www.echo-usa.com/chainsaws/cs-2511pn

Hoping brown santa shows up with it today.

 

[altatim]

I traded that 4910 I just got in for a 2511PN with Egan pipe myself.

https://www.echo-usa.com/chainsaws/cs-2511pn

Hoping brown santa shows up with it today.

WILD gains for just a pipe!

 

[RedneckChainsawRepair]

WILD gains for just a pipe!

Echo mufflers are stuffed up on some models.

Least the clone 2511 by v-modest is a open free flowing muffler with little pipe already stock.

 

[RedneckChainsawRepair]

Someone put my little echo inside a stihl box so it wouldn’t get stolen on way here.

All in jest guys.

 

[RedneckChainsawRepair]

@altatim

Local doing a 2511 took muffler apart to show in my chainsaw repair group FB.

No certain order just copied to share.

 

[altatim]

@altatim

Local doing a 2511 took muffler apart to show in my chainsaw repair group FB.

No certain order just copied to share.

Looks like my 576xp muffler. Just drilled a 5/8" hole through the baffle and it flows so much better. Really woke up the saw