I'm not happy with the amount of oil the stock oiler is putting out for the 36in bar using a .063. Is there a high volume for this saw and could someone point me at one?
Husky 395 High Volume Oil
- Thread starter diver64
- Start date
Help Support Arborist Forum:
Yes, Ive got it turned all the way up. I tried it in both directions just to be sure.
The 395 , is one of the best oilers out there , something isn’t right then , have you run the saw without bar to see oiler work ? open up the oil hole in the bar twice as big , I always open them up ,
sometimes the oiler hose filter looses its brass screen due to wear and will suck garbage up into your pump
EastCoastGreg
ArboristSite Lurker
I’m with Gord404 and Squareground3691, something is wrong. I mill lumber with my 395 and run a 36” bar and have no oiling issues to speak of, unless i have a clogged hole in the bar, which has happened, but rarely has that happened. I’d pull the bar and check for flow.
