Husky 435 wont keep runnin

[mottofreee]

In Serbian ... it's probably like that, anyway I didn't understand what he was saying.
It would be good in English because those clips have subtitles and can be understood. That was the idea - so that everyone could understand...

 

[SteveSr]

Is these readable?

Photo 1186 tells the tale... For the engine to puke this much spooge out the muffler it is either severely flooded or you have a needle/seat leak in the carb.

 

[saxon]

OK Thanks,
Why do you think the outside of the muffler was wet with fuel?
I have verified the hose placement.

Anyway thank you all

Do you have the shop manual for the saw?

No sir I dont

 

[irhunter]

No sir I dont

Check your inbox.

You will also, probably, want the IPL (parts list) for your saw...which I don't have.

One may go to the Beg for Manuals thread at this site, and ask for any of the documents (owner's manual, shop manual, IPL).

Roy

 

[saxon]

Working on it again today, after adjusting L & T out to 2.5 turns, it would run st high idle for a bit, 40 sec.,
And as soon as I touched the trigger it died.

 

[SteveSr]

OK Thanks,
Why do you think the outside of the muffler was wet with fuel?
I have verified the hose placement.

The carb has to meter fuel correctly. It can't do that with an internal leak. Pressurize the fuel inlet on the carb and look for leaks. A good carb should hold 7-10psi indefinitely! Find and fix any leaks.

 

[saxon]

Thank you that makes sense

 

[irhunter]

Good carb video by the guys who make them: