I know, it's a huge stretch someone will just have two of these laying around. But it can't hurt and maybe luck will strike.
IPL shows p/n 501 80 12-01.
IPL shows p/n 501 80 12-01.
-
If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
Want to Buy Husqvarna 181se thin rings
- Thread starter numnutz6383
- Start date
Help Support Arborist Forum:
I remembered that I had a few sets of these years ago. I went into deep search mode and checked out all the old parts. Aha here is a bunch of old thin rings (15). Good, should make us both happy. Checked them out to find they are 2100 rings and not 181. Darn, but I tried for you. Mike
Well, my purchase of the 181 fell through unfortunately, so I no longer have use for these rings. However, I did find a set on eBay, OEM NOS, that I asked the seller to measure for me. These appear to be the real deal, measured at 0.6 mm. Here is a link, still available as of 10 July 2023.
The measure at .6mm seems correct but the picture of the ring and piston does not look like a thin ring set up. Everyone I knew had two rings.
Hmm, I must have posted the wrong link somehow.
This is the link to the correct listing:
https://www.ebay.com/itm/2251356565...dFBQB2zRdG&var=&widget_ver=artemis&media=COPY
You want to part with 4 of those 2100 thin rings?
Yes absolutely but know these are used units
That’s fine, I have 2 topends that don’t have rings at all.
Send $50 to my paypal and 5 rings will be delivered to your mail. [email protected]
Or have them all for $10 each
