Sold Husqvarna 350 price reduced

[cuinrearview]

Rebuilt from the "case" up with Nachi bearings, Cross Performance seals, kitted HDA-159, new fuel line. Steel intake clamp. At some point in it's previous life the muffler came loose and melted the oil tank a little. It doesn't leak. I've added a 351 style muffler bracket. Timing advanced, muffler opened up under the deflector. The bearing cup divider has been removed and the square edges in the lower transfers and the cup have been smoothed. It has a Hyway 45mm popup piston. The base gasket has been deleted and the top of the bearing cup had .010 taken off. Squish is .021. Compression is just north of 180psi after 4 tanks. This is an easy starting, good running saw. The throttle response is very quick. I've had my fun with it and have everything to do another. I'd like $225 for the powerhead wearing your rim sprocket of choice. As usual, questions and pic requests are welcome.

 

[WKEND LUMBERJAK]

Rebuilt from the "case" up with Nachi bearings, Cross Performance seals, kitted HDA-159, new fuel line. Steel intake clamp. At some point the muffler came loose and melted the oil tank a little. It doesn't leak. I've added a 351 style muffler bracket. Timing advanced, muffler opened up under the deflector. The bearing cup divider has been removed and the square edges in the lower transfers and the cups have been smoothed. It has a Hyway 45mm popup piston. The base gasket has been deleted and the top of the bearing cup had .010 taken off. Squish is .021. Compression is just north of 180psi after 4 tanks. This is an easy starting, good running saw. The throttle response is very quick. I've had my fun with it and have everything to do another. I'd like $240 for the powerhead wearing your rim sprocket of choice. As usual, questions and pic requests are welcome.
View attachment 712668 View attachment 712669 View attachment 712670 View attachment 712671 View attachment 712672 View attachment 712673

Good looking saw.

 

[cuinrearview]

Good looking saw.

Thank you sir. I forgot to add, I tossed the Hyway ring and used a Caber. Circlips are OEM.

 

[TLG]

Educate me Tim. Are you advancing with an offset key or going keyless?

Sent from my XT1635-01 using Tapatalk

 

[cuinrearview]

I file some of the cast key off with a needle file.

 

[VA 372xp]

Very fine saw

 

[cuinrearview]

Very fine saw

Thank you. I have a 357 that's almost as nice that just needs a couple tanks through it before it hits the road too. How's your 359 coming?

 

[Josh 0619]

Thank you. I have a 357 that's almost as nice that just needs a couple tanks through it before it hits the road too. How's your 359 coming?

357 has my attention, very nice 350

 

[cuinrearview]

357 has my attention, very nice 350

It doesn't have tires to kick Josh... You have too many anyway

 

[Josh 0619]

you’re right but I still want everyone I see

 

[Scandy14]

Nice, clean 350 right there!

 

[cuinrearview]

you’re right but I still want everyone I see

I'll help you out and make sure you don't see this one. It's too nice to throw in the back of a truck, but not nice enough for a shelf. Just like I like 'em...

 

[chipper1]

I bet there isn't even any paint chipped off the bottom .
These things are great little saws to start with and with the work that's been done I bet it runs well.
Should have dropped it off here so I could sample it .
GLWS buddy.

 

[Jasonrkba]

I wish I wish!
Nice saw! Should go fast.

 

[VA 372xp]

Thank you. I have a 357 that's almost as nice that just needs a couple tanks through it before it hits the road too. How's your 359 coming?

Running good as of today gonna mount a new bar and chain and throw it in work truck and freshin up my regular one

 

[VA 372xp]

I have 350 i just rebuilt with flat 353 piston i can wait see how it runs and brett i have fueled the new 450

 

[VA 372xp]

What do you guys do about the cat mufflers , i feel like i dont need them in my life

 

[cuinrearview]

Never encountered one on a 350. When I get to unboxing and running my Dolkita I will put a 5100s muffler on it. There's always the screwdriver and a hammer trick, or the chicom Jungle muffler trick...

 

[VA 372xp]

Never encountered one on a 350. When I get to unboxing and running my Dolkita I will put a 5100s muffler on it. There's always the screwdriver and a hammer trick, or the chicom Jungle muffler trick...

I think both 359 have it ,

 

[cuinrearview]

I think both 359 have it ,

Bummer