Sold Husqvarna 365 Special with 372 cylinder.

[fearofpavement]

For sale is a nice Husqvarna 365 Special with an 0EM 50mm cylinder on it. This saw is in excellent condition. It's not new but it's nice. Look at the pictures and shoot me any questions. I have run this saw in wood and it will make you smile. This is for power head only. It has a 3/8 rim sprocket on it.
Everything works on the saw. ie, it starts, idles, cuts, oils, etc as it should. I pulled the muffler for a look see and the piston and cylinder are pristine. This saw will meet your expectations. I will ship it to your doorstep in the 48 states for $400. USPS money order preferred. Paypal is possible.
Look at the pics. Start a conversation or call me 09:00am to midnight EDT at 7705849020. In person pick-up is possible.

Note: I did not do the engine work on the saw. It was like that when I acquired it. I did replace the chain brake band and used an OEM new part. The price is firm.

 

[fearofpavement]

Here's the data tag.

 

[fearofpavement]

Just for info, I don't "detail" saws. I wash parts in my solvent tank if required, use compressed air, brushes and rags. If something is on the saw that didn't come off via one of those methods, it is still on there. So if someone sees pitch on the handle or some other sort of grunge, it doesn't mean it can't come off and improve the appearance of the saw, it means that I didn't spend the time to attempt removal. To me, saws are a tool to be used for cutting wood. If I were going to put one on the shelf, it would get more attention. I didn't paint anything on this saw, wax anything or armor all anything, it was just cleaned up. If you're looking for a powerful saw to actually use, this may be the one for you.

 

[nmurph]

This saw should be sold for the price you are asking!!!

 

[Marshy]

Is it missing the bar adjuster? Nice saw.

 

[jughead500]

FOP's saws he sales are top notch. Take it from me I bought a pm700 from him and could have eaten off of it.still dig it out from time to time when I'm feelin down.fire it up, wake up the neighborhood and smile.

 

[PULLINmyPOULAN]

Nice Tool

 

[RedneckChainsawRepair]

Is it missing the bar adjuster? Nice saw.

It's in the updated clutch cover on the side.

 

[PULLINmyPOULAN]

pm sent

 

[fearofpavement]

Took this saw along on a tree job today and bucked some wood until it got bigger than the length of the bar. It is really a great running saw. Too bad it's not a Stihl. lol.

 

[jwill]

Is the piston oem as well, or is it aftermarket?

 

[zogger]

Took this saw along on a tree job today and bucked some wood until it got bigger than the length of the bar. It is really a great running saw. Too bad it's not a Stihl. lol.

You have the second best CL ad I have seen all winter..most saw for the fair money

,,first best was my swap for a poulan 505....swapped a stihl clamshell 310 for it

 

[fearofpavement]

Is the piston oem as well, or is it aftermarket?

I didn't do the work, I didn't pull the cylinder, so I have no idea. In fact, I'm not sure I would know the difference if I did pull the cylinder. Are the pistons marked with a brand name?

 

[fearofpavement]

Sold on CL.