Not the greatest, but I'd new ring and run it if everything else is OK. Check out the main bearings they had issues back then.
Husqvarna 562xp wont idle?
- Thread starter david newbie
- Start date
Help Support Arborist Forum:
I pressure and vacuum tested the 2013 non runner and it passed! (what a fuss!@#$#). Here's picture of the carb it had, is this the problematic kind? I expect I will order a carb kit for it.
Also, somewhere along the line in a trade I ended up with 2 mystery cylinders. Could they be 562 or 555?
Not everyone had issues with the earlier carbs, I ran my 2012 552xp till 2021 when the original carb crapped out. Wouldn't specifically worry about it at this point.
far as I know the cylinders were the same. Don't take that as gospel though.
far as I know the cylinders were the same. Don't take that as gospel though.
Tried the flash the carb myself, but it didn't work, ran right out the door
LMAO , took a second to get it
Before any of you guys asked me for my number, sorry I’m already married
Nothing wrong with an EL48 carb.
Before you spend money on a carb kit, flip the carb over and remove the bottom cover (after taking off the horns) There is a fine screen in the bottom of the carb that gets plugged from old or bad gas. Normal symptoms are no power, bogging, not an idle issue, but if it’s really bad it can stop it running at all. 15 min job and an easy fix.
Before you spend money on a carb kit, flip the carb over and remove the bottom cover (after taking off the horns) There is a fine screen in the bottom of the carb that gets plugged from old or bad gas. Normal symptoms are no power, bogging, not an idle issue, but if it’s really bad it can stop it running at all. 15 min job and an easy fix.
