Husqvarna Chainsaws
- Thread starter briantutt
- Start date
Help Support Arborist Forum:
TIMBERTRON
DONE MOVING IN GREAT FALLS NOW
lots of huskies
Yup. Here he is:
Dairy farmer friend liked him so much he talked me into selling him.
Waiting on another from forum member.
You get a filter for yours Brian? Four used for 30 bux showed up on evilbay.
On a husky streak I put a new 46mm top end on a 50 Rancher. Had the cylinder spigot turned down to fit the crankcase.
Still have him tuned rich till the ring seats.
Still have him tuned rich till the ring seats.
I thought this thread was a sticky.
This Tapatalk sorts things kind of queer.
This Tapatalk sorts things kind of queer.
sunfish
Fish Head
359 with oem 357xp top-end.
briantutt
Addicted to ArboristSite
Looks Good! Glad it worked out. I have a filter on mine, I cut with this saw everytime I go out for wood.
briantutt
Addicted to ArboristSite
My 41 is doing something goofy. Whenever I start it it runs then when I try to give it gas to rev up it dies, like it's running out of fuel. I have tried tuning it over and over, cannot make it stop. I didn't do anything to this saw after I picked it up except replace the chain brake. So I suppose it could have picked up something in the carb? It just seems wierd that it ran fine for a year and then starts acting up. It was my new favorite limbing saw.
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,099
Wanted to share this quilt my wife made for my friends son. This is her second husky quilt, both if which were made on a Husqvarna viking sapphire 835 sewing machine!
sunfish
Fish Head
Air leak or carb problem. First thing I check is the fuel line & usually replace if I don't know how old it it. Fuel filter & tank vent too, just to get the easy stuff out of the way.
SawTroll
Information Collector
359 with oem 357xp top-end.
.....
...and what looks like a Norwegian made original Husky 18" lminated bar. Those bars are light, - and even though they aren't the longest lating ones, I like them!
briantutt
Addicted to ArboristSite
I replace the fuel line in the 41. Still doing the same thing. Maybe the duck bill behind the vent is not working. Looks like . it may be a chore to get to that part of the saw. I could rebuild carb first and see if that fixes it.
calebng15
Always lookin' for somthing to cut!
Dirt on the carb screen?
Brain is the tank full ? I had the same problem out a 288 the tank breather was plugged or not working I popped out the white filter thing and all is well leaked a lil fuel on its side so I put a new tank breather in its fine now just an FYI
The fuel filter may look ok and still have too much resistance and not be allowing enough flow to the carb. I have seen it before..........ask me how I know!!!!
When it runs right after you put in the new filter.
Brian: Did you ever get an air filter for your 65?
I snagged a 77 carcass not too long ago with a good filter and you are welcome to it.
The filter that is.
