Husqvarna Sticky!

[leecopland]

Thanks. I’ll check it later. May not be the truest reading with a cold engine.

Start assist on these?

Adda bit of oil to the cylinder before testing

 

[rocketnorton]

imo, oil will give a high reading.
lil squirt o mix down carb is what i do. some will get to pistom n lube it as in normal running.
got a 235 that blows 180. as said, 140 should run.

 

[xl130]

imo, oil will give a high reading.
lil squirt o mix down carb is what i do. some will get to pistom n lube it as in normal running.
got a 235 that blows 180. as said, 140 should run.

Well.....I think I found the problem.....

No amount of oil or fuel mix is going to help this.



Any idea how common these little husky piston sets are? Prices? Part numbers?

 

[leecopland]

That'll do it!

 

[leecopland]

Well.....I think I found the problem.....

No amount of oil or fuel mix is going to help this.

View attachment 861401

Any idea how common these little husky piston sets are? Prices? Part numbers?

Farmertec cheap as chips.

 

[xl130]

Farmertec cheap as chips.

Wow. $12 . That’s crazy cheap. Lol. I really need another saw to build like I need a hole in the head, but that’s a pretty cheap rebuild.

I looked quickly at the IPL for this little thing. Looks like it splits apart like my Homelite XL-2. No base gasket on these things?

 

[Woodslasher]

Here is a pic of the tag on my brother’s 2101 W, the only working pic of such a tag I can find. Not the most exciting photo, but finally proof that a factory-stamped 2101 W exists! I’ll get pics of the saw later.

 

[fechtichmac]

Husqvarna 90 – Husqvarna’s first chainsaw, launched in 1959

90

Gesendet von meinem SM-G955F mit Tapatalk

 

[Tobystihl]

Meet fury, made completely out of broken or damaged parts from the bin, it's my everyday saw!

 

[Woodslasher]

I spent yesterday fiddling with saws and mounted up a new set of dogs for my ported 272, courtesy of @Goinwheelin, along with a 32 inch bar and a freshly-spun loop of semi-skip chisel chain.

 

[leecopland]

My model 41, found at a dump by my buddy tuned up and ready to party. blows 145. I did a carb kit is all. Sometimes in the cut it seems to bog down. Once you release the pressure in the cut spins up again and off you go. I'm wondering if I have the H set a little too lean. I can't seem to get it to 4 stoke at max rpm

 

[fossil]

Air leak?

 

[Ryanp2842]

I'm new to the husquarvarna game. Need help identifying this guy. I think possibly a 2100cd??? Thanks for your input

 

[fossil]

I'm new to the husquarvarna game. Need help identifying this guy. I think possibly a 2100cd??? Thanks for your input

Looks like a 380CD

 

[Tothemax]

Question. I am trying to find out if the autotune diagnostics program is available to individuals? I don't mind paying but we need to have the ability to diagnose issues here at the FD. Especially since our local shop is usually very backed up and can't get to the saw for months. Please PM me as I get an instant notification. Thanks.

 

[truly]

I have a Husq 136. Put a new carb and fuel lines and wont hold a tune. Repair shop says air leak. Not worth fixing in my mind. If anyone wants to change my mind, give it a try. If anyone needs to scavenge some parts let me know.

 

[president]

I'm new to the husquarvarna game. Need help identifying this guy. I think possibly a 2100cd??? Thanks for your input

if ni aux oil pump it could be a 1100, same 99cc as 2100 only older

 

[Woodslasher]

if ni aux oil pump it could be a 1100, same 99cc as 2100 only older

No, look at the grip. As I recall 1100's had a plastic grip piece.

 

[Sepia]

Finished restoring this 254XP not too long ago. I think it turned out pretty good.

 

[xl130]

I was looking for a 272XP full wrap. They seem to be very rare. Lots of others Husqvarna full wraps out there. Will the 372 style fit a 272? Any other saws share the same mount as the 272XP?