Huztl MS660

[bikemike]

How much does a whole 660 kit cost?

 

[SlurpJ]

I don't recall hearing about this either. I definitely don't see any brass bushings in my kit.

 

[Ozhoo]

How much does a whole 660 kit cost?

$280 or so delivered to your door... of you could buy one of those Piltz kits for 7 something.

 

[Bedford T]

They are not there. Not included. The foil that on a 660 should cover the case under the muffler is missing. They bought me some and promised to put in in future cases. One of the few saws that can deform the plastic

 

[Bedford T]

You can modify this kit. That's the whole idea behind a kit. Buy you some OEM stuff some meteor stuff and have at it

 

[Ozhoo]

I don't recall hearing about this either. I definitely don't see any brass bushings in my kit.

They aren't included. They keep you from over torquing the screws and breaking the plastic.
p/n is 0000 963 0808

 

[Bedford T]

I had a big argument over the shutter. Even in Chinese air flow should be a concern. But there was an asterisk by it in their IPL. None of those missing items are a deal breaker.

They should be shipping the foil. They raised the price. You guys should be holding their feet to that fire.

 

[bikemike]

$280 or so delivered to your door... of you could buy one of those Piltz kits for 7 something.

Those putz kits are too fast for me.
But cheep is me. If I can get a kit build it run it and proves worthy through break inn then maybe a pipe it and blow it up with a sneaky pete NOS kit

 

[bikemike]

I had a big argument over the shutter. Even in Chinese air flow should be a concern. But there was an asterisk by it in their IPL. None of those missing items are a deal breaker.

They should be shipping the foil. They raised the price. You guys should be holding their feet to that fire.

Nothing a Lil duct tape can't fix.

 

[Bedford T]

Ok

 

[Hydro74]

I've had the same issue, tried adding material as a bodge to the arm, worked but shonky.

In the end genuine stihl arm fixed mine. Nice and snappy

Exactly my point I was trying to make obviously different tooled components


Sent from my iPhone using Tapatalk

 

[SlurpJ]

Just talked to my cousin and he can order me Stihl parts through work. Has anybody got a list of parts that may (or may not) be needed based upon experience along with part numbers. Here is what I have so far.

Brass bushing 0000 963 0808 qty ?
Air shutter 1122 141 4000
chain adjuster 1125 007 1021
clutch bearing 9512 933 2382 mine was plastic and broken upon arrival
Heat foil ???
OEM gas cap ??
OEM oil cap ??

Please share any info you have as what I'm looking at is missing some part #'s and correct me if I'm wrong.

 

[Bedford T]

You don't need a oem chain adjuster either will need the modifications detailed here for reasons detailed here

 

[Bedford T]

There are 3 bushings

 

[Bedford T]

Reflector foil 1124 084 8300

 

[Bedford T]

Oil gas
0000 350 0503
0000 350 0531

 

[SlurpJ]

Brass bushing 0000 963 0808 qty 3
Air shutter 1122 141 4000
chain adjuster 1125 007 1021
clutch bearing 9512 933 2382 mine was plastic and broken upon arrival
Heat foil 1124 084 8300
OEM gas cap 0000 350 0531
OEM oil cap 0000 350 0503
This is the brass bushing for the chain adjuster if needed:

Just trying to consolidate all parts and numbers that may be needed.

 

[Ozhoo]

...Please share any info you have as what I'm looking at is missing some part #'s and correct me if I'm wrong.

patience = priceless
Take your time and if something doesn't feel right, step back

 

[SlurpJ]

I've got patience, just prefer to order everything I may need ahead of time. Just finished up building a pistol that every single part had to be hand fitted which means filing to fit, took me every bit of 80 hours. So I know patience. Just hoping for a list of possible parts anyone doing a build like this (myself included) could need along with part #'s without having to read through all 62 pages.

 

[Bedford T]

yes and another thing you should consider. order extra screws at the same time you place your order just in case something comes up. they are cheap. a m5x16 spline will set you back more than $3 at the stihl parts counter. i would also consider a few woodruff keys. when your in the moment losing a key is real easy.

if you have never built one go very very very slow and that will be very very very hard to do. at the end you will see why.

prepare a way to install the brake spring. since i built mine i have bought lots of stihl tools and the one that is most satisfying is that tool. i will post a pic in a minute.

you really should read the entire thread with a pad of paper and take notes. man there ia a lot to it