Hydraulic guys. I need a seal kit

[dozerdan]

I need a seal kit for a hydraulic motor.The motor is marked Parker made in Italy. I contacted Parker and they tell me it was made by Marzocchi and sold under the Parker name.

Neither Parker or Marzocchi have any seal kits for this motor.

The motor is marked Parker MZG2AB208S2V and also has 987 made in Italy.

It was on a 72" mower deck on a Jacobsen Turfcat. I bought the deck at an auction and converted it to 3 point and I run it off of my tractor hydraulics.

Thanks
Dan

 

[CalTreeEquip]

Send it off to a place that rebuild hydraulic motors. Most small cities have them.

 

[dozerdan]

Send it off to a place that rebuild hydraulic motors. Most small cities have them.

I hate to do that when all that I need is a seal kit and I could do it myself. Local guy quoted me 250 to rebuild the pump, he wouldn't sell me a kit.

Thanks
Dan

 

[dozerdan]

Is there nobody out there that can supply me with a seal kit number?

Some of you guys have to work on hydraulic pumps and motors for a living.

Later
Dan

 

[dozerdan]

Send it off to a place that rebuild hydraulic motors. Most small cities have them.

If you have an engine in one of your used chippers that runs fine and just leaks oil around one of the crank seals do you just send it out and have the complete engine rebuilt?
Just curios.

Later
Dan

 

[Frank Boyer]

A couple of years ago someone on this list posted a shop that had an extensive list of kits. I changed computers and lost the info. You will probably have to measure your old stuff to get the correct new stuff.

 

[dozerdan]

A couple of years ago someone on this list posted a shop that had an extensive list of kits. I changed computers and lost the info. You will probably have to measure your old stuff to get the correct new stuff.

Thanks Frank
I will search again and see if I can find it.

Later
Dan