impulse line question

[Tractorsaw1]

What do i need to look for in impulse line hose. Looks like green fuel line keeps heating up & falling off. Was mentioned to me to try hobby silicon fuel line thats rated to 500°. What is everyone using on older saws? 920 jonsered that needs to stay running. What should work? 3/32 id hose is tough to get all the way on without removing handle bar to get at. Tips or tricks appreciated.

Thanks,

Patrick

 

[Marco]

Little spring steel band clamp may help. I've had good luck with little zip ties as a clamp.

 

[bama]

I use a bit of small diameter wire and wrap it a few times around the hose and tie it up. I also started using Stihl fuel hose. It is some nice stuff, but pretty expensive. Haven't had trouble on mine and I switched it out a couple of months ago.

 

[AZLOGGER]

What do i need to look for in impulse line hose. Looks like green fuel line keeps heating up & falling off. Was mentioned to me to try hobby silicon fuel line thats rated to 500°. What is everyone using on older saws? 920 jonsered that needs to stay running. What should work? 3/32 id hose is tough to get all the way on without removing handle bar to get at. Tips or tricks appreciated.

Thanks,Patrick

Patrick:
If you have a Husqvarna Dealer nearby have them order you these parts and you will be like new again!
Part# 503 4006-02 Hose Qty 1
Part# 504 2100-23 Spring Qty 2

 

[Tractorsaw1]

husky part number

Patrick:
If you have a Husqvarna Dealer nearby have them order you these parts and you will be like new again!
Part# 504 4006-02 Hose Qty 1
Part# 504 2100-23 Spring Qty 2

azlogger, dealer says hose part # is not a valid number?

 

[AZLOGGER]

azlogger, dealer says hose part # is not a valid number?

Numbers Numbers And more Numbers
Patrick: Sorry about that it should be Part# 503 4006-02 Hose
I edited my previous post to reflect the correct Part#
Thanks Robert