Jonsered 2065

[Garcien]

I have a 2065 jonsered which has the idle adjust screw vibrating out. It is the screw the throttle cable rest against. Has anyone had a similar problem? Would loctite work?
Thanks
Garcien

 

[pioneerguy600]

I have a 2065 jonsered which has the idle adjust screw vibrating out. It is the screw the throttle cable rest against. Has anyone had a similar problem? Would loctite work?
Thanks
Garcien

Possibly but how worn out are the threads, does the screw wobble about if side pressure is alternately applied. If the threads are still quite tight then Loctite will work.

 

[Bob Hedgecutter]

I have a 2065 jonsered which has the idle adjust screw vibrating out. It is the screw the throttle cable rest against. Has anyone had a similar problem? Would loctite work?
Thanks
Garcien

Are you running it without the screwdriver alignment tube that fits between interior of the airbox wall and over the three adjusting screws of the carb?

Part # 503 66 53-01

 

[SteveSr]

I have a 2065 jonsered which has the idle adjust screw vibrating out. It is the screw the throttle cable rest against. Has anyone had a similar problem? Would loctite work?
Thanks
Garcien

A lot of these carbs have a nylon "nub" in the screw block on the carb. These are designed to allow adjustment but hold the screw in place. If yours is missing the screw won't stay in place.