Jonsered 630 part number

[bama]

What is the part number for the fuel hose that goes through the fuel tank? I need the one with the enlarged rubber boot that seals the tank. I have ordered the wrong one twice and I don't have a clue how I can have such a hard time with this. The picture in the IPL is the part I am getting, but it is not the one that I need. Sorry to ask such a simple question, but I am sick of being wrong!

 

[sugarbush]

What is the part number for the fuel hose that goes through the fuel tank? I need the one with the enlarged rubber boot that seals the tank. I have ordered the wrong one twice and I don't have a clue how I can have such a hard time with this. The picture in the IPL is the part I am getting, but it is not the one that I need. Sorry to ask such a simple question, but I am sick of being wrong!

Are you ordering 503 57 76 01?

 

[HiOctane]

If you need the hose with an oversized "bump" enclosed on the hose,then you 5014 965 02.It will be a bit longer than the original one.

 

[bama]

Are you ordering 503 57 76 01?

Yes, that is what I ordered according to the IPL I have, but it doesn't show the bump. However, I had a tank that had a rubber boot that went over the hose, so I am using that used boot to make the hose work. I must not be seeing the rubber boot in the IPL because if I order the above hose, I need it as well so it seals the tank.

If you need the hose with an oversized "bump" enclosed on the hose,then you 5014 965 02.It will be a bit longer than the original one.

Yes, this is the hose that originally came with the saw. Why doesn't this show up on my IPL? Is it a newer style? I would hope they are interchangeable. What a pain in the arse!

 

[HiOctane]

Yes, this is the hose that originally came with the saw. Why doesn't this show up on my IPL? Is it a newer style? I would hope they are interchangeable. What a pain in the arse![/QUOTE]


You don't see the"bumped" one because you have a later IPL.You can install the newer one with with the separate rubber,but you have to enlarge the hole a bit to fit.Check your PM.