Looking for whatever I can get really, but need a piston, Cylinder and case gasket. I would consider a whole parts saw if it had a good cylinder, or any leads on any of this . Thanks!
-
If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
Want to Buy Jonsered 930 super/parts
- Thread starter StoneyMeadowMaple
- Start date
Help Support Arborist Forum:
Definitely not an easy find but they are out there with some patience.
If you know a good machinest you can use a 920 cylinder and have the ports opened up ..that's the only difference between the two .
Ernie
If you know a good machinest you can use a 920 cylinder and have the ports opened up ..that's the only difference between the two .
Ernie
I would need a 930 cylinder to match. Would the 920 piston work as well?
Do you have your old one ?
Yes the pistons are the same .
Ernie
Yes the pistons are the same .
Ernie
There is stuff on ebay right now...
I do not, long story, but i just got a box of parts back.
It's very easy to see what has to be done if you find a 920 cylinder..
Open port vs closed
I had a local machine shop do it for me and it worked out perfect .
Here are the two side by side..
Ernie
Yep - There's this top end set here for 920 and for the price, I'd take a chance on them:
https://www.ebay.com/itm/235844025339
I sent him a message, hoping he has the wrist pin as well. Thanks!
Thank you for that. I need the 930 cylinder at least for measurements for machining
Get yourself a cylinder gasket and that will show you exactly how much has to be machined off .
Ernie
Similar threads
Want to Buy
Looking to buy
