Jonsered Chainsaws

[Real1shepherd]

That will turn into a dog fight.

What will, the auction bids? Maybe, but I have an amount that I won't go over and the foolish can pay whatever they want. I only need the saw for parts and I can certainly live without it.

Kevin

 

[67L36Driver]

How many turns open on the H & L screws to start on a 670?

 

[taplinhill]

I start with one and a half out on the Low which is usually close and one out on the High which should be on the rich side.

 

[67L36Driver]

K thanks bud.

 

[Real1shepherd]

How many turns open on the H & L screws to start on a 670?

Most Tilly's wind up at 1 1/4 out on Low, 3/4 out on High, providing everything has been checked out. But like Eric said, 1 1/2 out on Low and 1 out on High is a great place to start before you lean it down a bit.....if you have to turn in more than 3/4 on High to get a decent 4stroke, something is wrong like a seal leak.

Kevin

 

[Real1shepherd]

Driver was right...ebay 90 now over $117. Don't want it that bad...I'm out. I'd sure like that full-wrap though, to repair and put on my work 90.

Kevin

 

[Hoggwood]

Hi folks,

I am looking to find a couple of IPL's. 625 - 1992 and 630 - 1984. Searched but can't seem to find anything earlier than '93

Thanks - Cory

 

[Real1shepherd]

Cory...http://www.jonsered.ws/IPL.htm

Scroll down...625, 630 and 630a

Kevin

 

[Real1shepherd]

Well, Driver was right about the ebay 90;http://www.ebay.com/itm/Vintage-Jonsered-90-chainsaw-parts-or-repair

I wouldn't have believed it, but it happened. I think the fact that the seller was painfully honest about the saw and didn't use faux, sterling descriptors helped him get more bids.

Kevin

 

[taplinhill]

Jonsereds 66E Brochure

 

[taplinhill]

Jonsereds 90 Brochure

 

[taplinhill]

Jonsereds 451EV Brochure

 

[taplinhill]

Jonsereds 801 Brochure

 

[taplinhill]

1980 Jonsereds Brochure

 

[taplinhill]

1981 Jonsereds Brochure

 

[taplinhill]

1982 Jonsereds Brochure

 

[Cantdog]

Awesome Eric!!! Thanks for posting these!! Good reading!!!

 

[Real1shepherd]

Eric, have you ever seen a J'red ad featuring the 111S where they had a Swede model instead of a PNW model(I mean the guys, not the saws)?

Kevin

 

[Cantdog]

Eric, have you ever seen a J'red ad featuring the 111S where they had a Swede model instead of a PNW model(I mean the guys, not the saws)?

Kevin

I'm going out on a limb here.....but I'll guess not.......trees are not as big in Sweden as the PNW......

 

[Zero_sum]

Yup... Good stuff!