Jonsered Chainsaws

[Goinwheelin]

You can start here and/or skip to Post#60 which actually has a machinist drawing but without dimension. What he shows is exactly what I need made and I'm golden.
https://www.arboristsite.com/community/threads/granberg-chisel-bit-file-n-joint.62604/page-2

I can't find pics of the unit the machinist did.....I think Philbert linked me to that.

Kevin

I looked at the pics real quick but I’ll have to sit down after work and read the thread. I’m not familiar with that system of filing a chain. I’ve seen pictures of those setups but never used one. Guess it time to learn! Lol

 

[chipper1]

Digging a little deeper into the 70e. The AV mounts are in great shape. Just need to fashion a puller for the flywheel and clutch and continue with disassembly.
View attachment 835179View attachment 835181

What size sprocket is that on there, looks pretty big.

 

[Goinwheelin]

What size sprocket is that on there, looks pretty big.

3/8-8

 

[Real1shepherd]

I looked at the pics real quick but I’ll have to sit down after work and read the thread. I’m not familiar with that system of filing a chain. I’ve seen pictures of those setups but never used one. Guess it time to learn! Lol

If I had the money, I'd just pay a machinist to replicate the whole file part of the jig and be done with it...in steel. The bases are still available from Granberg.

They used to show up on eBay....but it's been yrs and they always went high. The Granberg model sticker on mine was actually pasted over their standard round file jig sticker. I believer it was G-107(A or B).

Before the Internet, I called Granberg long distance and asked about the square file jig. They had just sold their last one and nothing left in the warehouse.....that was in the late 80's.

The original instructions were printed on yellow paper. They made little sense until you used the machine for awhile....too much going on there for a novice, because you have to be aware of about four things going on simultaneously. I have the instructions, but have not been able to find them for yrs. I don't need them anymore, but be nice to have them still.

Most of the pics in the beginning of that thread were lost when AS got hacked.

Kevin

 

[Cantdog]

Wow......this one has come down!! Perhaps it'll go this time....

https://www.ebay.com/itm/Jonsered-1...718402?hash=item3fe39df082:g:AxYAAOSwyPRe070x

 

[Real1shepherd]

Wow......this one has come down!! Perhaps it'll go this time....

https://www.ebay.com/itm/Jonsered-1...718402?hash=item3fe39df082:g:AxYAAOSwyPRe070x

Whoa....isn't this the same guy that had it listed for $1,000 at some point???

I dunno....his verbiage in his description is so agressive that it's off putting to me. It plays on the 'Don't be a stupid buyer and make me the victim again' card.....

Kevin

 

[svk]

What’s the story on the decals on this one?

 

[taplinhill]

What’s the story on the decals on this one?

I believe that was the "Rock-N-Roll" edition. And yes, I'm serious. It came with a special graphic on the bar as well.

 

[Real1shepherd]

Those rockin' Swedes.....oh boy!

Kevin

 

[woods works]

I have one of the cardboard bar covers that came with that saw. Ya gotta love a redhead!

 

[Real1shepherd]

Wow....sex appeal from Jonsered!!! I wonder if they had a girlie calendar too??

Kevin

 

[Goinwheelin]

last call on flywheel/clutch pullers. These will work on the 70E and other saws with a 40mm flywheel pattern and 30mm clutch pattern.

I will have 5 available. Not looking to make money on these just pay for shipping.

 

[Cantdog]

last call on flywheel/clutch pullers. These will work on the 70E and other saws with a 40mm flywheel pattern and 30mm clutch pattern.

I will have 5 available. Not looking to make money on these just pay for shipping. View attachment 837985

Got your parts boxed up today....will go out tomorrow!!!

 

[Goinwheelin]

Got your parts boxed up today....will go out tomorrow!!!

Same here tomorrow or Thursday! Thanks!

 

[Real1shepherd]

last call on flywheel/clutch pullers. These will work on the 70E and other saws with a 40mm flywheel pattern and 30mm clutch pattern.

I will have 5 available. Not looking to make money on these just pay for shipping. View attachment 837985

Sent you an email about this...thanks.

Kevin

 

[Real1shepherd]

Guys....you should jump on these pullers....you'll never see better!!

Kevin

 

[burnses]

anyone out there set me up with a case gasket for a 910....I got a long term build that's starting to get real...

thanks
sap can

 

[Cantdog]

How 'bout this one?? Such a deal!!! $600-$700 saw running!! I wonder if he wants to buy a couple good runners?...LOL!!!

https://www.ebay.com/itm/Jonsereds-...=143572429562795fc4cca72042c0803bb243a9348627

 

[Goinwheelin]

Bar studs on the 70E were hammered so I took one to work for reverse engineering. We do a lot of jobs that involve stainless steel so there was plenty to pick from. I figured nitronic 60 would be a good choice.

 

[Real1shepherd]

How 'bout this one?? Such a deal!!! $600-$700 saw running!! I wonder if he wants to buy a couple good runners?...LOL!!!

https://www.ebay.com/itm/Jonsereds-...2429562?hash=item216d956afa&_trkparms=ispr=1&

"Could be a simple problem".....could win big @Vegas too.

"This is a $600-700 saw in working order".....in what universe is a 621 worth that??

Kevin