Any idea what model this J-red is? It may or may not be crossing my bench in need of repair and I'd like to know the model before I am asked if I'll touch it.
Jonsered Chainsaws
- Thread starter briantutt
- Start date
Help Support Arborist Forum:
Is it worth trying to pick up? If so, how much would be a fair offer, given that I know nothing about it?
- Joined
- Feb 17, 2009
- Messages
- 16,768
- Reaction score
- 16,091
- Location
- Beautiful Rockbound Coast of Maine
Yep that's a 90 fer shur. Great saw but like all these old soldiers...all parts are NLA.....not to say they can't be found NOS or used...just saying from a repair shop point of view, it's info you might want before taking on the project.
LOVE to have that full-wrap!
I've got a nice factory wrap on my 90 I'd trade straight across.
That's the good one my helper broke throwing posts on top of it.
You'd need to get it all cleaned up to value it. Compression check etc. Away from eBay I wouldn't offer more than $200....more like $150. You could be searching a long time for parts depending on what it needs. You won't find the correct used recoil handle at any of the usual sources....they've been out of those forever.
Kevin
I've got a nice factory wrap on my 90 I'd trade straight across.
That's the good one my helper broke throwing posts on top of it.
You'd need to get it all cleaned up to value it. Compression check etc. Away from eBay I wouldn't offer more than $200....more like $150. You could be searching a long time for parts depending on what it needs. You won't find the correct used recoil handle at any of the usual sources....they've been out of those forever.
Kevin
- Joined
- Feb 17, 2009
- Messages
- 16,768
- Reaction score
- 16,091
- Location
- Beautiful Rockbound Coast of Maine
Interesting
JONSERED 590 POP UP PISTON 45MM REPLACES PART # 503168701, EXTRA POWER, NEW, USA | eBay to
In the description it says "Not made in China or Taiwan" ........and there are references to USA but doesn't say made in USA....... I am assuming they're made by VEC of India....
JONSERED 590 POP UP PISTON 45MM REPLACES PART # 503168701, EXTRA POWER, NEW, USA | eBay to
In the description it says "Not made in China or Taiwan" ........and there are references to USA but doesn't say made in USA....... I am assuming they're made by VEC of India....
- Joined
- Feb 17, 2009
- Messages
- 16,768
- Reaction score
- 16,091
- Location
- Beautiful Rockbound Coast of Maine
If you read the description it says "brand"......Performance Saw Supply.....I googled it and that brand is a part/affiliate of 'Lil red Barn.....so no indication where these come from, but again I suspect India....
You're probably correct on that. I bought that new SEM's module from them for the Husky 2100 and when I asked the 'Lil Red Barn guy where it was made, he got all pissy with me. Never did get an answer.
Kevin
Kevin
Try the usual places like sawagain, chainsawr and eBay. Others can add their favorite 'out houses'.
Great model saw, best of luck!
Kevin
Great model saw, best of luck!
Kevin
Thanks Kevin.
I tried Ebay, had no luck there. But i will keep looking.
Justin
I tried Ebay, had no luck there. But i will keep looking.
Justin
- Joined
- Feb 17, 2009
- Messages
- 16,768
- Reaction score
- 16,091
- Location
- Beautiful Rockbound Coast of Maine
Sorry I'm not finding any just now either on ebay, sawagain or chainswr......when looking remember that one from an 820, 830, 920 or 930 will also fit...
It's a waiting game for OE parts;might be three on ebay in one week and then not again for a yr....lol.
There was a seller on eBay getting rid of lots of J'reds stuff. I can't remember his name, but you go to his store and it was remarkable what he had. But he was in to other marques too. I didn't bother to bookmark him, sorry. Maybe try the sellers listing J'reds stuff and go into their eBay stores, if they have them
Kevin
There was a seller on eBay getting rid of lots of J'reds stuff. I can't remember his name, but you go to his store and it was remarkable what he had. But he was in to other marques too. I didn't bother to bookmark him, sorry. Maybe try the sellers listing J'reds stuff and go into their eBay stores, if they have them
Kevin
Well, well.....been looking for this little gem for at least five yrs. I'm hoping it was the same size for the 80 bottom louver muffler as well. I asked the seller to measure it for me.
Fingers & toes crossed!
https://www.ebay.com/itm/NOS-Jonser...531225?hash=item2ae73363d9:g:dBAAAOSwRLxepGyb
Kevin
Fingers & toes crossed!
https://www.ebay.com/itm/NOS-Jonser...531225?hash=item2ae73363d9:g:dBAAAOSwRLxepGyb
Kevin
I didn't know the other models also fitted. I will have a look for them as well.
Cheers
Justin
- Joined
- Feb 17, 2009
- Messages
- 16,768
- Reaction score
- 16,091
- Location
- Beautiful Rockbound Coast of Maine
Here's an old 80.......look at the last pic.....look at the leg wear on the case and trigger handle wear.......this unit has been there...and most the way back..!!!
Vintage Jonsereds Gas Chainsaw "P" Serial 455536 NOT Running | eBay
Vintage Jonsereds Gas Chainsaw "P" Serial 455536 NOT Running | eBay
Already has the muffler mod too.
Mark
Mark
Holy chit!! That looks exactly like the one I bought yrs ago that "had compression" and the only thing it had was a case FULL of water! Lol.......
What you're seeing there is a saw worth $25-$50 including shipping. I'd pay $5 just to hear its real provenance story.....I bet it's a whopper!
Kevin
This doesn't look too bad, if you really want to get into a 90 off eBay and you believe the seller.
https://www.ebay.com/itm/Vtg-Gas-JONSEREDS-90-Chainsaw-w-20-Bar-Chain-Runs-Good-Parts-Repair
Kevin
https://www.ebay.com/itm/Vtg-Gas-JONSEREDS-90-Chainsaw-w-20-Bar-Chain-Runs-Good-Parts-Repair
Kevin
Sold....$285 plus shipping.
Maybe they'll come here with questions.
Kevin
Maybe they'll come here with questions.
Kevin
