Jonsered Chainsaws
- Thread starter briantutt
- Start date
Help Support Arborist Forum:
Could someone post a pic of how the av under the clutch cover on the 910e full wrap bolts on ?
I think have it correctly but just wanna be sure .
Thanks
Ernie
I think have it correctly but just wanna be sure .
Thanks
Ernie
Ernie....hope this helps. I haven't decided which 910 I have to make whole yet, so no mount on this one yet. But the 801/80/90 and the 910 terminate the same where the A/V unobtainium mount is as pictured. The thread hole in the saw body can strip out over time....in which case you just poke a longer bolt through and use a nut. Not a lot of thread turns in that hole. Or, you could put a longer bolt through the hole and nut it anyway....before it strips.
Attachments
That's perfect....I was gonna put mine on upside down .
I'm was thinking the bolts went from the top down and not from the bottom up .
Thanks very much !
Ernie
You'd think there would be a lot of stress at that A/V but there's really not. Eventually the A/V will tear or get too floppy. And I'm talking seasons of professional use.
Kevin
Kevin
I’m putting the jonsered 670 half wrap back on. If someone might be interested in this full wrap for their jonsered or possibly your husky with a hole drilled on side and maybe cut off on side too. Might let go. Just going on shelf.
Also has my redneck made bracket and longer fasteners needed. Plus I used a spike to make a strong inner brace deal for both fasteners to go through first to strengthen.
Message if interested.
Wow SOLD already on FB group.
Also has my redneck made bracket and longer fasteners needed. Plus I used a spike to make a strong inner brace deal for both fasteners to go through first to strengthen.
Message if interested.
Wow SOLD already on FB group.
I hate Facebook.....but if I was really looking for some unobtainium part, I'd post on their Jonsered page in addition to other sources I have.
I had to get an app that specifically removed the Facebook people from tracking me all over the Internet.
Kevin
I had to get an app that specifically removed the Facebook people from tracking me all over the Internet.
Kevin
Cleaned up a painted the half wrap to put back on jonsered 670 champ. Just used a muffler paint I had on hand.
Just prefer this one in half wrap.
Just prefer this one in half wrap.
I'm looking for a full-wrap on a 111S.....don't know if I'll live long enough to pull that find off.
Kevin
Did you end up finding a 111S wrap? If not, pm me...
Scott
On the Jonsereds aluminum full-wraps, the subcontractor here used some kind of black paint, maybe anodized.....I dunno. It's was very thin on there and all of mine is worn away. The smaller diameter steel full-wraps have the grip shrink stuff, plus some black paint on the metal.
The full wraps in the larger aluminum for the 801/80/90 are pretty rare. I only have the one. The steel full-wraps for the 910 seem to be out there if you look hard enough......I have one of those too. I also have a full-wrap for the 2094. I hope everyone east of here hates full-wraps on old Jonsereds so they are available to us again someday.....
Kevin
The full wraps in the larger aluminum for the 801/80/90 are pretty rare. I only have the one. The steel full-wraps for the 910 seem to be out there if you look hard enough......I have one of those too. I also have a full-wrap for the 2094. I hope everyone east of here hates full-wraps on old Jonsereds so they are available to us again someday.....
Kevin
Yeah, the full wraps for the 670 are not real common. Jonsered did not have the presence out west that they had in the east. Most of the full wraps I've seen for them have been on the Cutters Edge fire saws.
Scotsco of Portland, OR was the only place I knew where you could buy Jonsereds saws in the PNW. The dealer networks were very slow to form until well after after Electrolux Group AB bought the company. If you wanted one, you had to go out of your way to get one.
I never saw a pro J'reds until I moved to CO in like '80. And that was at a dealer in Montrose. I still have his business card.....lol!
Kevin
I never saw a pro J'reds until I moved to CO in like '80. And that was at a dealer in Montrose. I still have his business card.....lol!
Kevin
I saw this listed on craigslist in northern Vermont. It's a Raket 52. I've seen a Raket 50, but nothing newer. Being so close to the border I'm wondering if this came from Canada. Any thoughts?
- Joined
- Feb 17, 2009
- Messages
- 16,768
- Reaction score
- 16,091
- Location
- Beautiful Rockbound Coast of Maine
I've not seen a Raket 52 either. Perhaps you're right it coming from Canada or perhaps Sweden directly.
Can you trust that sticker, or does the saw look 'correct'?
Kevin
Kevin
The saw looks honest, and the seller just calls it a Jonsereds. Here is the post:
"I have some Jonsered chain saws for sale model 49 & 52 in good working cond. I also have some for parts. Best offer . I am posting for another person if interested call them direct......."
Magnus the Swede could probably field a question like this over on his collectors site.
Kevin
Gamma Woods
ArboristSite Operative
I stumbled across a mislabeled (or mis-pictured) listing on ebay if anybody is trying to hunt down an air filter for the 820/830/920/930 with the single-bolt top. Not the cheapest, but I'm sure it's worth it to the right guy. I almost bought it, but the ones I have are still in great shape.
https://www.ebay.ca/itm/392246720826
https://www.ebay.ca/itm/392246720826
I've paid near $30 for those round 80/621 flocked AF's......NOS like in the link.
I've repaired tiny splits and holes in nylon mesh filters with clear nail polish. Never had it fail over time. Clean the filter just as you would normally.
Kevin
I've repaired tiny splits and holes in nylon mesh filters with clear nail polish. Never had it fail over time. Clean the filter just as you would normally.
Kevin
