Want to Sell Large Remington Nos parts lot

[Dave86]

Hi Again
How is your selection of roller tips?
I have a bar with a bad one.

What diameter do you need?

 

[Yukon Stihl]

I will look at particulars...

 

[Yukon Stihl]

4 rivets 2 1/2" diameter,took a crappy picture
Thanks

 

[canadian175]

Anything to fit a sl9?any p@c?anything for sl 4?

 

[Dave86]

Anything to fit a sl9?any p@c?anything for sl 4?

Some. What part numbers?

 

[Yukon Stihl]

Any 2 1/2 “ roller tips?
Thanks

 

[Dave86]

Any 2 1/2 “ roller tips?
Thanks

No extras.

 

[canadian175]

Some. What part numbers?

Piston and cylindar,rings.or just rings for both. I have a sl4 bit low on compression.

 

[Dave86]

Piston and cylindar,rings.or just rings for both. I have a sl4 bit low on compression.

I don't have the part numbers for those

 

[Dave86]

I don't have the part numbers for those

What I meant is that I don;t have rings of the correct part number.

 

[canadian175]

No rings at all?

 

[Dave86]

No rings at all?

I have a bunch of piston rings for Remingtons. Not the part numbers for SL4 or SL9

 

[canadian175]

Ok i have a old cylindar for a sl9 i'll have a look.also how much for 3 or 4 of those condensers?

 

[canadian175]

65002 is on sl9 cyilandar.# is bottom of the exhaust port.

 

[Dave86]

Ok i have a old cylindar for a sl9 i'll have a look.also how much for 3 or 4 of those condensers?

The rings I have are 2 inch and 2,24 inch. The SL4 and SL9 are smaller. I have attached the IPLs to help you find parts. They are courtesy of Ray Benson, who provides them in the beg for manuals thread.

 

[canadian175]

Would you know what the large rings be in metric?pain in the ass to look up.also how much for 4 condensers? I have a few large pioneer and pm canadien pm saws

 

[Dave86]

Would you know what the large rings be in metric?pain in the ass to look up.also how much for 4 condensers? I have a few large pioneer and pm canadien pm

 

[canadian175]

I have a bunch of piston rings for Remingtons. Not the part numbers for SL4 or SL9

I have a mesurement for a sl4 1.

I have a bunch of piston rings for Remingtons. Not the part numbers for SL4 or SL9

1.81is bore size for sl 4

 

[Dave86]

Would you know what the large rings be in metric?pain in the ass to look up.also how much for 4 condensers? I have a few large pioneer and pm canadien pm saws

I have condensers with Remington and Wico part numbers. They will fit on Phelon and Repco ignition assemblies. Do you know what type of ignition parts your saws have?

 

[Dave86]

I have condensers with Remington and Wico part numbers. They will fit on Phelon and Repco ignition assemblies. Do you know what type of ignition parts your saws have?

The rings would be about 52 and 57mm