lets get Christmas started early this year

[Homelite410]

I would be willing to take a couple off of your hands.

Ok 2 are yours got 6 left!!

 

[Evanrude]

What is the width where the tip fits? I have a tip that may fit.

I had a fella PM me about postage just after posting it. So it's pending.

 

[psuiewalsh]

I had a fella PM me about postage just after posting it. So it's pending.

Ok if he needs a tip i can still check if you measure .

 

[psuiewalsh]

Ok 2 are yours got 6 left!!

I have a 16" large mount husky too if you or someone is still looking. Still wonder about the 288 and 3120 fit.

 

[sld961]

Ok 2 are yours got 6 left!!

I could use one.

 

[Jacob J.]

John I could sure put that Meteor 272XP piston kit to good use if it isn't spoken for already.

I still need to dig out some stuff for this thread. I know I have some Homelite, McCulloch, and Poulan bars to offer up. Possibly a saw project or two as well. Will sort that out this weekend. I probably won't be able to cover shipping for folks this time. It's a lean year...

I can use a 272 piston as well if someone else hasn't gotten it...

So, first thing I have for this thread is two brand new 028 brake handles. They don't fit anything else, only 028. So you 028 guys can hit me up and I'll get 'em headed your way. I also have quite a bit of 045/056 parts except for flywheels, ignitions, mufflers, and cylinders. So if you need something for 045/056 other than an ignition, flywheel, muffler, or cylinder- I probably have it.

 

[Homelite410]

Crap I should jumped on that 272 piston..... oh well you guys are awesome!!

 

[srcarr52]

I seem to have an abundance of theses so I'll give away 2 #30 style handpieces that fit on Foredom, Dremel, Mastercarver, and Harbor Freight flex shaft motors.. I've gone through them so they don't have heat issues like a normal Harbor Freight ones. Receiver pays the $5.80 for the flat rate box.

 

[Eccentric]

I can use a 272 piston as well if someone else hasn't gotten it...

Well Jacob my friend, IF I happen to be 'first in line' for that 272XP piston and you're '2nd'............then I step aside for you to get it. You probably have a more pressing need for it right now than I do. I'm slowly gathering parts to build a 272XP for a friend. It's somewhat of a backburner project (and I have a few of those).

 

[redfin]

I seem to have an abundance of theses so I'll give away 2 #30 style handpieces that fit on Foredom, Dremel, Mastercarver, and Harbor Freight flex shaft motors.. I've gone through them so they don't have heat issues like a normal Harbor Freight ones. Receiver pays the $5.80 for the flat rate box.

View attachment 319260

What size is the shaft on them?

 

[srcarr52]

What size is the shaft on them?

The sheath shaft bore is 0.404", all the spec are the same as a standard Foredom #30.

 

[fastLeo151]

I had this bar chain and 10 pin sprocket on a homelite 750, its time to pass it on..
Merry Christmas!

 

[Evanrude]

Ok if he needs a tip i can still check if you measure .

fastLeo151 claimed the bar.

 

[rattler362]

I would to say a big Thank you to Homelite410 I got the vice today and it is Top notch work cant wait to try it out he take's pride in his work. Once agin Thank you

 

[Homelite410]

OK. 5 deflectors left. Anyone need a 350 husky crank?

 

[Jacob J.]

Well Jacob my friend, IF I happen to be 'first in line' for that 272XP piston and you're '2nd'............then I step aside for you to get it. You probably have a more pressing need for it right now than I do. I'm slowly gathering parts to build a 272XP for a friend. It's somewhat of a backburner project (and I have a few of those).

No worries my man, and don't forget- I got stuff here for you.

 

[fastLeo151]

I had this bar chain and 10 pin sprocket on a homelite 750, its time to pass it on..
Merry Christmas!

Gone to homelite410

 

[blsnelling]

I seem to have an abundance of theses so I'll give away 2 #30 style handpieces that fit on Foredom, Dremel, Mastercarver, and Harbor Freight flex shaft motors.. I've gone through them so they don't have heat issues like a normal Harbor Freight ones. Receiver pays the $5.80 for the flat rate box.

View attachment 319260

I would love to have one of these if still available. I've yet to go through my stuff, but will before the end of the year.

 

[srcarr52]

I would love to have one of these if still available. I've yet to go through my stuff, but will before the end of the year.

Yup. You're number two. PM me your addy.

 

[Homelite410]

Yup. You're number two. PM me your addy.

Thank you Shaun! I just ran one for a half hour and really like it!!