Log splitter filters

[Mr.Stihl]

Why do I need a filter for a log splitter also what about microns in filter ratings and gpm thru the filter I have no filter hook up yet to my splitter also does it connect to the oil reserve it has a 12 HP kohler with a 16 gpm pump maybe I need yo get a bigger pump. Thank you for any replys. Mr.Stihl

 

[triptester]

A filter for log splitters is normally 10 micron and is placed in the return line to the reservoir. The 12 hp. engine will handle up to a 22 gpm 2-stage pump.
If you already have the 16 gpm pump, you may want to stick with it. When using a 22 gpm pump every thing must be sized accordingly in order to work properly. Reservoir, filters, hoses, and control valve must be increased in size to accept a 22gpm pump at double the cost.

Look under fluid power basics at this site for some general info.
http://hydraulicspneumatics.com/200/FPE/IndexPage.aspx

 

[TheLazyBFarm]

Here's a pretty good selection of hydraulic filters. You can cross these filters to the Wix/Napa brand by using the filter look up tool at wixfilters.com.

http://surpluscenter.com/sort.asp?numrec=20&sort=2&keyword=HTF1&catname=hydraulic&UID=2009032809245507

Good luck.

Al