Looking for some Echo saws

[mboer]

Hello.
I am looking for the following saws.
Echo cs-510
Echo cs-4400

I dont really need the complete saw. Just the motor
with carb and muffler. But i will take it complete if need
be. I want to convert them to use on a large scale r/c
airplane.
Thanks. Mike

 

[Gravely Grinch]

Just curious here, why does it have to be an Echo engine? I'll look in the bone pile at work.

 

[Lawn Masters]

If ya want a Mac 38CC engine, I've got one of those I can ship out. no ignition, clutch, or flywheel on it, but its here if ya want it.

 

[mboer]

Hi Gravely Grinch
The Echo motors are used because of there small size and light weight. The cases have built in mounts. Plus ignitions are avaiable for these engines. The stock flywheel mag ignition is not used. Thanks for looking. Mike

 

[Gravely Grinch]

Mike

I have 2 500VL powerheads but the jug is smoked on both of them. Sorry I couldn't help. When you do locate an Echo for your project look into modding the muffler, Echo saws respond well to muffler mods.

Rick

 

[mboer]

Thanks for the muffler mod idea. But these motors will end up with tuned pipes. The VL,EVL,EV series of motors will not work. The crankcases are part of the saw housing.Thanks for looking. Mike

 

[Mange]

I have some from Jonsered 2040, i think it could work.

 

[mboer]

I think all the Jonsered saws have non removable motors. The saws that i looked at had the crankcases as part of the saw frame. Thanks for the suggestion Mange.

 

[sawtoter06]

Hello, just wanted to let you know I have a CS-4400 muffler and carburetor listed on ebay right now. The carb ends in about 11 hours and the muffler ends in about 4 days. I also have a cylinder/piston/crankshaft assembly from this same saw that has been tested at about 75psi so it probably would need some honing or TLC (this is not listed on ebay). Just thought I would let you know. Thanks!

 

[MacDaddy]

I have a echo 66 cc twin cylinder I might sell for the right price and it runs perfect