Mastermind Meets The Echo CST-610EVL

[parrisw]

Yep jeweler's torch. I just use a small oxygen tank and regulator, along with mapp gas.



The thin soft metal that most mufflers are made from brazes nicely.....



:msp_thumbup:

I had one of those, but disliked it, ran out of gas and oxy so fast.

 

[Jimmy in NC]

:msp_sneaky:

If it gets back on track you can just derail it again....no worries!

 

[Kenskip1]

What I would like to know, is after this project is completed, how much did all this cost?Was it worth all the monies put into it? Was a second mortgage really necessary?Parts alone could fill my F150 gas tank for 3 months.Labor? Well Randy is cheap labor as we are all aware.This portion of the equation is more than reasonable. This I am most certain.LOL Was the monies spent on therapy wasted?Did the case of Amsoil arrive on schedule?Ken

 

[Mastermind]

I had one of those, but disliked it, ran out of gas and oxy so fast.

I don't use the little bottles of Oxy......you're right.....they won't make it thru a brazing rod. I do use the small bottles of gas but they last a while.

What I would like to know, is after this project is completed, how much did all this cost?Was it worth all the monies put into it? Was a second mortgage really necessary?Parts alone could fill my F150 gas tank for 3 months.Labor? Well Randy is cheap labor as we are all aware.This portion of the equation is more than reasonable. This I am most certain.LOL Was the monies spent on therapy wasted?Did the case of Amsoil arrive on schedule?Ken

Cost of about 600.00

 

[fatboymoe]

Cost of about 600.00[/QUOTE]

And worth every penny!!!!

 

[Kenskip1]

Actually this is most reasonable I was thinking something in the 1 thousand area.Randy, you had better hike up your fee, Ken

 

[Hddnis]

You figure a single jug saw costs in the ballpark of $300.00 for less work and that sounds really reasonable.



Mr. HE

 

[Mastermind]

Actually this is most reasonable I was thinking something in the 1 thousand area.Randy, you had better hike up your fee, Ken

No Sir.

Brian has been a good customer on more than one project. I've not been in any hurry, and he's ever complained nor pressured me. :msp_thumbup:

 

[echoshawn]

Didn't someone say running by the weekend? opcorn:

 

[excess650]

Didn't someone say running by the weekend? opcorn:

What weekend of what year?

 

[echoshawn]

Sorry Randy, had to bump this up...
Some pie with my apology?

 

[Naked Arborist]

DERAILED! Cake, pie, bacon ,BS and beer

 

[MechanicMatt]

Randy, I bought my daughter a puppy for her 8th birthday today. My new saw money is GONE. Can YOU please put a smile on my face with a video of a ported twin cylinder bad @$$ saw!!! Please!!!!!!!

 

[Mastermind]

Sorry guys....we had to order a new "oil pipe" that goes from the manual oil pump......

Partstree says they are still available and one it in route.

 

[MechanicMatt]

Randy, here is the deal. I like your builds I really really do, $hit I like running the saws you've built even more. But If you don't get this saw back together soon..................................

How about next weekend????????????????

 

[CST610EVL]

Cdi

Hey Randy

How about lending me the CDI unit for a ..................... year or so hey .....................

 

[Mastermind]

Randy, here is the deal. I like your builds I really really do, $hit I like running the saws you've built even more. But If you don't get this saw back together soon..................................

How about next weekend????????????????

We're trying.

Hey Randy

How about lending me the CDI unit for a ..................... year or so hey .....................

Sorry.

 

[echoshawn]

opcorn:
Impatiently waiting.....
:hmm3grin2orange:

 

[moody]

The world wasn't made over night, it only took him a week..... It's ok Randy it'll be well worth the wait. I bet you're more anxious than any of us. Seem's like everytime you think it's about done something little pops up.

 

[Warped5]

Ok .... I'm setting the over/under for the saw video at post #835 .....

I'm actually surprised that the t-shirt thread hasn't caught this one yet ...