McCulloch 2-10 help

[lostarnes]

I’m cleaning up and hopefully will get my dads old 2-10 running, just to keep. I have it torn down and have ordered a gasket set from eBay. Does anyone know if the 10-10 gaskets will work on a 2-10? I couldn’t find any specific to a 2-10. If anyone has a source for 2-10 gaskets please let me know.

 

[Maintenance supervisor]

I’m cleaning up and hopefully will get my dads old 2-10 running, just to keep. I have it torn down and have ordered a gasket set from eBay. Does anyone know if the 10-10 gaskets will work on a 2-10? I couldn’t find any specific to a 2-10. If anyone has a source for 2-10 gaskets please let me know.

They should work for your 2-10 , go to the "Beg for Manuals "thread and request an IPL for your saw to help.
Good luck.

 

[lostarnes]

They should work for your 2-10 , go to the "Beg for Manuals "thread and request an IPL for your saw to help.
Good luck.

Thanks, I already did that but I didn’t see if the gaskets would interchange

 

[Razor6niner]

They would have the same part numbers I would think. And I believe they will. But there many on here that can definitely confirm it for sure.

 

[heimannm]

It depends on which carburetor your 2-10 has, the 10-10 always has a cube type carburetor (Walbro SDC or Tillotson HS) and many of the 1, 2, 3, 4, & 5-10 models used the McCulloch bullfrog style carburetor.

The attached 2-10 IPL shows both carburetor options and the associated gaskets for your reference.

Check out the McCulloch Chainsaw thread or the Official McCulloch 10-10 thread in the stickies area for more help.

Mark