McCulloch Chain Saws

[watsonr]

I've been sawing this pissfir since the mid 1980s.

Is that an earring your wearing... in the 80s that meant something..

 

[RandyMac]

Is that an earring your wearing... in the 80s that meant something..

Nah, no earrings, not a hippie.

 

[watsonr]

Better to be a hippie than a yuppie!

Just kidding ya... but you have been cutting that tree for years, maybe why he asked if the chain was dull

 

[mini mac man]

Hey OT I got board. Decided to break an egg. Lol Rod is still good so for once I tore the mini apart for nothing. Not sure what the rattle at idle was. View attachment 265109

 

[Overtrained]

Hey OT I got board. Decided to break an egg. Lol Rod is still good so for once I tore the mini apart for nothing. Not sure what the rattle at idle was. View attachment 265109

Prob the clutch drum/clutch making noise at idle.

 

[Overtrained]

The wife made me a MINI, check it out


http://www.arboristsite.com/off-topic-forum/216224.htm

 

[rwoods]

SP80 vs SP81 & PM850

On ebay there is a listing for an NOS SP80 cylinder and a listing for an NOS PM850 cylinder. Both have several pictures and you can see that both the intake ports and the exhaust ports are different between the models. Ron

 

[joeymt33]

On ebay there is a listing for an NOS SP80 cylinder and a listing for an NOS PM850 cylinder. Both have several pictures and you can see that both the intake ports and the exhaust ports are different between the models. Ron

I've bought cylinders from that seller and he has gone above and beyond the standard for customer service.

 

[joeymt33]

Those cylinders didn't last long, who got them?

 

[fossil]

NOS Mac parts

Guys,

I have just waded into Mac country with my first purchase. I met a guy who is in the small engine repair business earlier this year and he used to have a shop but works from home now. He has quite a few old Poulan parts. I get lists from him when he finds stuff and offer them to the good men over on the Poulan thread and pick them up and ship to them.
The price I pay is what they get them for and they pay for shipping.
Anyway, I mentioned today I had bought a 380 and he pulled out a few Mac parts.
If you are interested I definitely will not be out there again until the end of January or so or when I have a reason to go out there.

If anyone wants these they are first come first served. Just PM me.

PN 90357 $24.00 .404 sprocket kit with washer, 8 pin rim and drum, still in the blister card. I think there's a bearing in there as well but don't know for sure. It's for the big saws. From memory (it's bad) squinting at the card, I-70 series, S250, 300, 380, 440. 790. 795, 797, SP125, CP125 and I'm sure some others I've missed.

PN 63935 $10.00 Moulded fuel line with the filter. It looks similar to the one in my 380 but I don't know which models it fits.

PN 85557 $4.00 This looks like an oil filter to me. Black plastic tube with fine screen in the middle, about 1-1/2 to 2' long.

Tim

Tim

 

[cpr]

Too much mini talk in here.

AARRRR.

SUPERS, savvy?

 

[paccity]

agreed.:hmm3grin2orange:

 

[leeha]

Ya, What cpr said.
Super 797 in action. Old woods saw
that needed points and carb kit.


Lee

 

[Brian13]

How about a 797 and a 890 I am still working on.

 

[leecopland]

those two Titans

McCulloch Chain Saws in action

Mark

Hi Mark,

What do you think about those two Titans on your tailgate?

I have one that I have yet to put back together, but I hear that they are a pretty good saw for a middle weight.

I've put those parts on my 1-42 and all goes well. I really need to do a complete carb rebuild, I cleaned mine and found a new pump diaphragm only, but it's running. I guess rings are available for these old guys, as the comp is only about 110-115psi.

Hope all is well with you

Lee

 

[Eccentric]

I've bought cylinders from that seller and he has gone above and beyond the standard for customer service.

Those cylinders didn't last long, who got them?

Joey or Ron can you please post the links to the auctions so I can see how they differ from my cylinders?opcorn:

 

[joeymt33]

Joey or Ron can you please post the links to the auctions so I can see how they differ from my cylinders?opcorn:

Sorry bud, I just searched using my laptop and could not find it. I can find it using my iPhone with the eBay app. It comes up under completed listings. I don't know what's wrong. The title says, "vintage chainsaw mcculloch sp80 sp 80 nos block crankcase cylinder p/n 87296"

 

[Overtrained]

Too much mini talk in here.

AARRRR.

SUPERS, savvy?

If someone sets me up with a SP125 ill retire the mini's.......just sayin

 

[paccity]

build a monster multi mini.:msp_smile:

 

[Overtrained]

build a monster multi mini.:msp_smile:

That would be fun trying to get them all to run the same:bang: