I've picked up a MS 881 with a Stihl 41", .404 bar and looking to swap the .404 sprocket nose with a 3/8.
After some digging I was able to find 4 different sets of part numbers below (as well as the Stihl 41" bar information).
Is there someone who can confirm, which ones will work as a "Bolt On" application?
Stock Stihl 41" bar 3002-000-9757, .404, .063, 12 Tooth (Nose Sprocket), 123 DL
3003-650-2539, 3/8, .063, 13 Tooth
3002-650-2526, 3/8, .063, 10 Tooth
3003-650-2528, 3/8, .063, 13 Tooth
3003-650-2551, 3/8, .063, 11 Tooth
Thanks,
Mad3400
After some digging I was able to find 4 different sets of part numbers below (as well as the Stihl 41" bar information).
Is there someone who can confirm, which ones will work as a "Bolt On" application?
Stock Stihl 41" bar 3002-000-9757, .404, .063, 12 Tooth (Nose Sprocket), 123 DL
3003-650-2539, 3/8, .063, 13 Tooth
3002-650-2526, 3/8, .063, 10 Tooth
3003-650-2528, 3/8, .063, 13 Tooth
3003-650-2551, 3/8, .063, 11 Tooth
Thanks,
Mad3400