NE 346XP - Affects of Cat Muffler & Muffler Mod - Porting & Popup To Come

[super3]

I believe the deflector used is from a 288, # 503 07 83-01

 

[Banacanin]

Hmmmmmmmmm.......................If you would only listen ............Glad you finally figured it out.....



I guess now that Brad said it.... Its cut in stone ..........


...

Where's your video?

 

[Trigger Man]

One more question Brad, considering all the saws you have had in your hands, which bone stock saw would a guy have to buy to compare to a muff modded 346xpNE?(which saw would you compare it to?) Not trying start a fight over brands, just asking your opinion, which I value! Thanks.

 

[woodgrenade]

Thanks for the pictures.

 

[AUSSIE1]

Deflector-5030783-01

Screen-5034056-01

 

[blsnelling]

The deflector is PN 503 58 99-01 and costs me $8.74.

The spark arrestor screen is PN 503 40 56-01 and costs me $4.97.

The screws are from the hardware store.

 

[blsnelling]

I believe the deflector used is from a 288, # 503 07 83-01

Deflector-5030783-01

Screen-5034056-01

That deflector is much more expensive at $13.96. There are others as well, but all more expensive.

 

[lone wolf]

and how much should you open up a stocker

 

[blsnelling]

One more question Brad, considering all the saws you have had in your hands, which bone stock saw would a guy have to buy to compare to a muff modded 346xpNE?(which saw would you compare it to?) Not trying start a fight over brands, just asking your opinion, which I value! Thanks.

I would at least try to answer that, but it would take the thread in a direction I don't really want to go.

 

[blsnelling]

and how much should you open up a stocker

This saw is stock in the video. Go ahead and open it up the entire area of the deflector. Just hold it back a little from the front edge since the deflector doesn't cover all the way forward.

 

[Trigger Man]

I would at least try to answer that, but it would take the thread in a direction I don't really want to go.

That's fine Brad,I don't want to put you in Hot Water.

 

[blsnelling]

That's fine Brad,I don't want to put you in Hot Water.

It's not that. I just know where the thread will go.

 

[Trigger Man]

Is the unlimited coil a must for the muff mod?

 

[lone wolf]

It's not that. I just know where the thread will go.

now we really want to know

 

[mdavlee]

That's a pretty good change just from muffler mod. That cheaper part number for the deflector is good, also.

 

[joatmon]

It's not that. I just know where the thread will go.

Brad,

Are you doing this for Niko's benefit? He's the only one that would cut wood that size.

Carry on,

ole joat

 

[sachsmo]

Hole size?

i sure could use a little help with the muffler pics and size hole would be great

359 EPA

I'm no expert,


I went by the theory bigger is better!


(I know, I know I weld like crap, but she runs gooood)

Mine has .750 I.D. tube running through the inside "baffle plate", with a flare on the side closest to the port. Basically a straight pipe, it's not butted against the flange, so I suppose some will still exit the stock (through the straw) location.

 

[SawTroll]

Brad,

Are you doing this for Niko's benefit? He's the only one that would cut wood that size.

Carry on,

ole joat

Birch that size turns into good firewood when dry, so I don't leave tops and branches that size in the woods....

 

[joatmon]

Birch that size turns into good firewood when dry, so I don't leave it in the woods....

Good deal ole buddy. Just had to let you and Brad know I was paying attention.

 

[harrybeaver]

The deflector is PN 503 58 99-01 and costs me $8.74.

The spark arrestor screen is PN 503 40 56-01 and costs me $4.97.

The screws are from the hardware store.

I put those numbers into the search on Baileys web site nothing came back. Then I typed in the names and was able to find the deflector but I am still not able to find the screen. Can you recommend a supplier? Thanks