Newest addition to the pile

[KASH]

IMHO Windsor bars were the best .
Kash

 

[camel2019]

IMHO Windsor bars were the best .
Kash

Really thinking it over it will be $100 to my door.

 

[KASH]

What I said about Windsor bars was from the days when they were made by Windsor in Windsor Ontario Canada.What quality they are now I have no idea.
Kash

 

[pioneerguy600]

What I said about Windsor bars was from the days when they were made by Windsor in Windsor Ontario Canada.What quality they are now I have no idea.
Kash

I have used Windsor bars as the preferred replacement bar on every saw I own and have never worn one out. Back when we bought Pioneer saws new from our dealer we had him put a new Windsor on before we picked the saw up, ran them on the good old Poulans, then the Sachs Dolmars. Still have every one of them plus a pile that came in on saws that were deemed parts contributors. I even run today on my Stihl`s, they will certainly outlast me.

 

[pioneerguy600]

Old used stuff is not an easy find around here and both of the Stihl dealers(1 is a Oregon dealer)give you a clueless look if you ask for anything other then the home owner grade stuff that’s on the wall nether will make chains.
There’s a Stihl/echo/Oregon dealer in a small town about an hour from here that’s better he will make/repair chains but has hardly any stock of bars that don’t fit home owner saws and now that Oregon seems to be culling the duracut line and most odd ball bars not much available I asked about a k095 mount duracut (22 inch .063) that was available on the Oregon website the night before and he couldn’t get it I went back and looked and it was removed from the website. I’m glad my little John Deere 30(echo 302s) uses a A041 mount can pick those up at any hardware store it’s currently the only one in the stable that’s a grab in go.

I looked into my stash and found a new 24" Oregon that fits a 14 mm mount , its a 3/8" X .063 brand new never used if that would fit your needs send me a PM.

 

[camel2019]

Well I have been diving into this saw a bit while waiting for a carb kit to arrive. it has 150psi and the cylinder looks really good doubt this saw has been used too much seems like it just needs a carb kit(dried out) and a new intake gasket on the carb side the old one was torn around the pulse port? think that’s what was giving me the most trouble.
Still needs a deep cleaning being covered in sawdust.